Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4464
#4466

Asymmetric Draped Sheath Dress

Pattern #4465

A knee-length women's sheath dress with front and back princess seams and an asymmetric front: on the left a hemmed side panel folded into a cascading pleat, on the right a diagonal topstitched seam. Three-quarter sleeves with a gathered cap. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres.

Tech. Description

Asymmetric Draped Sheath Dress

A knee-length women's sheath dress with front and back princess seams and an asymmetric front: on the left a hemmed side panel folded into a cascading pleat, on the right a diagonal topstitched seam. Three-quarter sleeves with a gathered cap.

When To Wear

  • At the office and business meetings, with court shoes or low heels.
  • For daytime events and dinners in spring and autumn, with a jacket or coat over it.

Key Design Features

Silhouette: Fitted sheath shaped by princess seams on the front and back.

Length: Knee length.

Neckline: Round neckline finished with an interfaced facing.

Sleeves: Three-quarter length, one-piece set-in sleeves, gathered at the top of the cap; hem turned up and topstitched.

Front: Centre front panel between princess seams. On the left, the lower edge of the left side front is double-turned 0.5 cm and topstitched, laid over the left lower front and folded into a pleat that falls as a cascade. On the right, the lower front is joined to the front with a diagonal seam topstitched 0.5 cm from the seam.

Back: Centre back seam with an invisible zipper at the top, and princess seams.

Finishing: Seams overlocked; dress hem turned up 2 cm and topstitched.

Level Of Difficulty

Intermediate. Asymmetric assembly of the front with a pleated overlay basted into the seams, princess seams, an invisible zipper, a gathered sleeve cap and a neckline facing.

Fabric Recommendations

Dress fabrics with good drape, of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (neckline facings)
  • Invisible zipper

Cutter's Must

From main fabric:

  • Center Back – 2 pieces
  • Side Back – 2 pieces
  • Left Side Front – 1 piece
  • Right Side Front – 1 piece
  • Center Front – 1 piece
  • Sleeve – 2 pieces
  • Lower Front – 1 piece
  • Left Lower Front – 1 piece
  • Back Facing – 2 pieces
  • Front Facing – 1 piece

From fusible interfacing:

  • Back Facing – 2 pieces
  • Front Facing – 1 piece

Sewing Instructions

  1. Fuse interfacing to the Back Facing and Front Facing.
  2. Overlock the center back edges separately. Stitch the center back seam from the zipper mark downwards. Press the seam allowances open, including the zipper opening allowances. Insert the invisible zipper. Stitch the back princess seams. Overlock seam allowances and press towards the center.
  3. Overlock the upper edge of the Left Lower Front. Turn the lower edge of the Left Side Front 0.5 cm to the inside and press, turn it again by 0.5 cm and topstitch. Lay the Left Side Front over the Left Lower Front, match them and baste along the side edges, folding in the pleat. Stitch the right princess seam (Center Front to Right Side Front). Overlock the seam allowance and press towards the center. Stitch the Lower Front to the front, overlock the seam allowance, press it upwards and topstitch 0.5 cm from the seam. Stitch the left princess seam of the front. Overlock seam allowances and press towards the center.
  4. Stitch the side and shoulder seams. Overlock seam allowances and press towards the back.
  5. Stitch the shoulder seams of the facings, press seam allowances open. Overlock the outer edge. Place the facing onto the neckline and stitch. Clip seam allowances and turn facings to the wrong side. Stitch the facing to the shoulder seams and the center back seam.
  6. Run a line of long, loose stitches along the top of the sleeve cap and gather it. Stitch the sleeve seam. Overlock seam allowance and press towards the back. Set the sleeves into the armholes according to the notches. Overlock the lower edge of the sleeve, press to the wrong side and topstitch.
  7. Overlock the lower edge of the dress, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?