Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A knee-length women's sheath dress with front and back princess seams and an asymmetric front: on the left a hemmed side panel folded into a cascading pleat, on the right a diagonal topstitched seam. Three-quarter sleeves with a gathered cap. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres.
A knee-length women's sheath dress with front and back princess seams and an asymmetric front: on the left a hemmed side panel folded into a cascading pleat, on the right a diagonal topstitched seam. Three-quarter sleeves with a gathered cap.
Silhouette: Fitted sheath shaped by princess seams on the front and back.
Length: Knee length.
Neckline: Round neckline finished with an interfaced facing.
Sleeves: Three-quarter length, one-piece set-in sleeves, gathered at the top of the cap; hem turned up and topstitched.
Front: Centre front panel between princess seams. On the left, the lower edge of the left side front is double-turned 0.5 cm and topstitched, laid over the left lower front and folded into a pleat that falls as a cascade. On the right, the lower front is joined to the front with a diagonal seam topstitched 0.5 cm from the seam.
Back: Centre back seam with an invisible zipper at the top, and princess seams.
Finishing: Seams overlocked; dress hem turned up 2 cm and topstitched.
Intermediate. Asymmetric assembly of the front with a pleated overlay basted into the seams, princess seams, an invisible zipper, a gathered sleeve cap and a neckline facing.
Dress fabrics with good drape, of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; hem allowance of the dress and sleeve hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:

#4464
Stand Collar 3/4 Sleeve Dress with Wrapped Waist

#4463
3/4 Sleeve Pleated Midi Dress with Neck Slit

#4462
Fitted Princess Seamed Dress with Gathered Sleeves

#4460
Sleeveless Stand Collar Dress with Bow

#4459
Asymmetrical Overlay Maxi Dress with Lace Panels

#4458
Fitted Sleeved Dress with Front Pleats

#4472
Elbow Sleeve Rounded Collar Sheath Dress
#4473
Sheath Dress with Illusion Yoke and Gathered Back

Minerva Support
Online