Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4462
#4464

3/4 Sleeve Pleated Midi Dress with Neck Slit

Pattern #4463

A long women's dress with a round neckline slit at the centre front, a waist panel with four horizontal tucks on the front and back, pleats on the lower front, and three-quarter guipure sleeves gathered into cuffs. The bodice and waist panels are lined. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres, and guipure in the same colour as the main fabric for the sleeves.

Tech. Description

3/4 Sleeve Pleated Midi Dress with Neck Slit

A long women's dress with a round neckline slit at the centre front, a waist panel with four horizontal tucks on the front and back, pleats on the lower front, and three-quarter guipure sleeves gathered into cuffs. The bodice and waist panels are lined.

When To Wear

  • For weddings, anniversaries and other celebrations as a guest.
  • For evening receptions and theatre, with heeled shoes.

Key Design Features

Silhouette: Fitted bodice with darts, a separate waist panel, and a slightly flared skirt.

Length: Below mid-calf.

Neckline: Round neckline with a vertical slit at the centre front forming a small V, finished by the lining.

Sleeves: Three-quarter set-in sleeves cut from guipure, gathered at the lower edge into a cuff folded in half.

Waist: Middle front and middle back panels with 4 horizontal tucks, 2 mm deep, spaced 2 cm apart.

Skirt: Lower front with pleats laid at the top, forming curved, petal-shaped folds; lower back with darts.

Back: Upper back with darts, centre back seam with an invisible zipper.

Finishing: Hem turned up 2 cm and topstitched.

Lining: The upper front, upper back and waist panels are lined; the lining is joined at the neckline and attached to the zipper tape and armhole seam allowances. The skirt is unlined.

Level Of Difficulty

Intermediate. Evenly spaced tucks, pleats on a shaped lower front, a slit neckline finished with the lining, an invisible zipper and gathered sleeves set into cuffs.

Fabric Recommendations

Dress fabrics with good drape, of natural or blended fibres, and guipure in the same colour as the main fabric for the sleeves.

Additional Supplies

  • Invisible zipper
  • Lining fabric
  • Fusible interfacing (cuffs)

Cutter's Must

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 2 pieces
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Middle Back – 2 pieces
  • Middle Front – 1 piece
  • Cuff – 2 pieces

From contrast fabric (guipure):

  • Sleeve – 2 pieces

From lining fabric:

  • Middle Back Lining – 2 pieces
  • Middle Front Lining – 1 piece
  • Upper Back – 2 pieces (cut using the Upper Back pattern)
  • Upper Front – 1 piece (cut using the Upper Front pattern)

From fusible interfacing:

  • Cuff – 2 pieces

Sewing Instructions

  1. Stitch the darts on the Upper Back and Lower Back pieces, trim the dart allowances to 1 cm and press towards the center.
  2. Stitch the darts on the Upper Front, trim the dart allowances to 1 cm and press towards the center; press the lower darts towards the center as well. Lay the pleats on the Lower Front. If necessary, clip the area marked with a wavy line. Baste the pleats in place along the upper edge.
  3. On the Middle Back and Middle Front pieces, working from the wrong side, make 4 horizontal tucks spaced 2 cm apart. Tuck depth – 2 mm.
  4. Stitch the Upper Front and Lower Front to the Middle Front, and the Upper Back and Lower Back to the Middle Back. Press the seam allowances towards the middle pieces.
  5. Overlock the center back edges separately. Stitch the center back seam from the zipper mark to the hem and press the seam allowances open. Insert the concealed zipper.
  6. Stitch the shoulder seams and press the seam allowances open. Stitch the side seams. On the skirt, overlock the seam allowances and press towards the back; on the bodice, press them open.
  7. Stitch the darts on the front and back lining and attach the Middle Front Lining and Middle Back Lining. Overlock the lower edge of the lining. Stitch the side and shoulder seams of the lining and press the seam allowances towards the back. Place the dress and the lining right sides together and stitch around the neckline. Cut along the center front slit line. Clip the seam allowances on the curves, turn the lining to the inside, ease out the edge and press. Baste the lining to the dress along the side and lower seam allowances. Attach the lining to the zipper tape. Tack the lining to the armhole seam allowances.
  8. Stitch the Sleeve seam. Overlock the seam allowance and press towards the back. Sew a line of long stitches (loosened upper thread) along the lower edge and gather. Stitch the Cuff into a ring. Fold the Cuff in half lengthwise and press. Stitch the outer half of the Cuff to the sleeve. Fold under the seam allowance of the inner half and topstitch it into the attachment seam. Set the sleeves into the armholes.
  9. Overlock the lower edge of the dress, press to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?