Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless, floor-length women's dress with a fitted bodice joined at a high waist seam to two skirts: a full lace inner skirt and an outer skirt of main fabric with a shaped edge that falls in a cascade and opens on the left side. Lace insets frame the armholes. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, of natural or blended fibres, and lace for the armhole insets and inner skirt.
A sleeveless, floor-length women's dress with a fitted bodice joined at a high waist seam to two skirts: a full lace inner skirt and an outer skirt of main fabric with a shaped edge that falls in a cascade and opens on the left side. Lace insets frame the armholes.
Silhouette: Fitted bodice with darts, long skirt widening towards the hem.
Length: Floor length.
Neckline: Round neckline finished with interfaced facings.
Sleeves: Sleeveless; the armholes are framed by double-layer lace insets, stitched to the armhole and finished in the ditch.
Waist: Seam above the natural waist joining both skirts to the bodice.
Skirt: Outer skirt in three pieces (upper front skirt, right and left back skirts) with a shaped, turned and topstitched edge that drapes in a cascade on the left side, front and back, showing the lace inner skirt underneath.
Back: Upper back with darts; centre back seam through the bodice and both skirts, with an invisible zipper at the top.
Finishing: Hem turned up 2 cm and topstitched.
Intermediate. Two skirt layers joined to the bodice in one seam, double lace armhole insets, a shaped skirt edge with a narrow topstitched hem, a neckline facing and an invisible zipper.
Dress fabrics with good drape, of natural or blended fibres, and lace for the armhole insets and inner skirt.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; hem allowance of the dress – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From lace:
From fusible interfacing:

#4458
Fitted Sleeved Dress with Front Pleats

#4460
Sleeveless Stand Collar Dress with Bow

#4462
Fitted Princess Seamed Dress with Gathered Sleeves

#4455
Two-Tone Panel A-Line Dress

#4463
3/4 Sleeve Pleated Midi Dress with Neck Slit
#4454
Fitted Dress with Contrasting Yoke and Bands

#4464
Stand Collar 3/4 Sleeve Dress with Wrapped Waist

#4453
Fit and Flare V-Neck Cap Sleeve Dress

Minerva Support
Online