Pattern

CUTTER'S MUST

• From main fabric:
1. BACK PANEL – 2 QTY
2. FRONT PANEL — 1 QTY on fold
3. SLEEVE — 2 QTY
4. BACK COLLAR STAND — 2 QTY
5. FRONT COLLAR STAND — 2 QTY
6. CUFF — 2 QTY
• From FUSIBLE INTERFACING:
1. BACK COLLAR STAND — 1 QTY
2. FRONT COLLAR STAND — 1 QTY

Sewing Instructions

1. Fuse the collar stands with FUSIBLE INTERFACING.
2. Stitch darts on BACK PANEL pieces, press seam allowances towards the center. Stitch the center back seam, press seam allowances to the left side, serge.
3. Fold and secure pleats on the FRONT PANEL neckline.
4. Stitch shoulder seams, press seam allowances towards the BACK PANEL and serge.
5. Stitch collar stand pieces in pairs. Place the outer and inner collar stands right sides together and stitch along the upper contour. Clip SEAM ALLOWANCES at curves. Turn the collar stand right side out, straighten, press. Fold and secure the inverted pleat.
6. Attach the SLEEVE to the FRONT PANEL and BACK PANEL, clipping the pieces at the corners. Clip SEAM ALLOWANCES at curves, press towards the SLEEVE and serge.
7. Stitch the lower edge of the SLEEVE simultaneously with the side seams, press SEAM ALLOWANCES and serge.
8. Stitch the CUFF into a loop, press SEAM ALLOWANCES open. Press the CUFF in half lengthwise, right side out. Align the CUFF with the right side of the SLEEVE and stitch. Serge SEAM ALLOWANCES, turn the CUFF right side out.
9. Serge the bottom edge of the garment, press to the wrong side and topstitch.