Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A fitted women's top with a V-neckline, princess seams on the front and back, and an asymmetric lower front with pleats that fan out towards a longer, flared hem on one side. Three-quarter set-in sleeves gathered at the cap; invisible zipper at the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics made from natural or blended fibres.
A fitted women's top with a V-neckline, princess seams on the front and back, and an asymmetric lower front with pleats that fan out towards a longer, flared hem on one side. Three-quarter set-in sleeves gathered at the cap; invisible zipper at the centre back.
Silhouette: Fitted through the bodice by princess seams, flaring below the waist at the pleated lower front.
Length: Below the hip, with an asymmetric hem that drops lower on one side at the front and slopes at the back.
Neckline: V-neckline with a centre front seam. The centre front is lined with self fabric; the back neckline is finished with an interfaced facing.
Sleeves: Three-quarter length, set-in, with the cap gathered between the marks; hems turned up and topstitched.
Front: Centre front in two halves, with separate left and right side fronts that differ in shape. A one-piece lower front is joined to the upper front; its pleats are stitched along the marks and pressed upwards.
Back: Princess seams on both sides and a centre back seam; left and right back pieces are cut separately for the asymmetric hem.
Closure: Invisible zipper in the centre back seam.
Finishing: Seams serged; hem pressed up and topstitched.
Intermediate. Asymmetric pieces cut singly, stitched pleats joined into a seam, a lined V-neckline, an invisible zipper and gathered set-in sleeves.
Dress fabrics made from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; hem allowance for the hem and sleeve hem – 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match! The labels on the patterns are written on the right side!
From main fabric:
From fusible interfacing:
Center Front Lining 1 is cut from the main fabric.

#4420
Blouse with Round Neckline & V Keyhole

#4421
Fitted Top with Front Peplum

#4424
Paneled Back Button Blouse with Contrast Bow

#4425
Sleeveless Overlap Top with Neck Flounce
#4406
Long Sleeve Bow Neckline Blouse

#4434
Pleated Blouse with Flutter Sleeves

#4435
Blouse with Front Pleats, Collar and Gathered Sleeves
#4439
Fitted Button-Front Lace Blouse

Minerva Support
Online