Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless women's dress with a wide neckline cut into a narrow V-slit at the centre front, a separate midriff band with four horizontal pin-tucks, and long curved pleats on the front skirt. The bodice and midriff are lined. Drafted to your own measurements. Recommended fabric: dress fabrics with good drape, from natural or blended fibres.
A sleeveless women's dress with a wide neckline cut into a narrow V-slit at the centre front, a separate midriff band with four horizontal pin-tucks, and long curved pleats on the front skirt. The bodice and midriff are lined.
Silhouette: Fitted bodice and midriff, with a skirt that widens slightly towards the hem.
Length: Long skirt with a straight hem, turned up and topstitched.
Neckline: Wide, high neckline with a narrow vertical V-slit at the centre front, finished with the lining.
Sleeves: Sleeveless; the armholes are finished with the lining, stitched in two steps (back, then front).
Waist: Separate midriff pieces at the front and back, each with 4 horizontal pin-tucks 2 mm deep, spaced 2 cm apart. Upper front and back are shaped with darts below the bust and shoulder blades.
Skirt: The lower front is laid in pleats that fall from the midriff seam in long curved loops, basted along the upper edge; the lower back is shaped with darts.
Back: Centre back seam running the full length, with an invisible zipper from the neckline to the zipper mark.
Lining: Upper front, upper back and midriff are lined; the lining is slip-stitched to the zipper tape. The skirt is unlined.
Intermediate. Evenly spaced pin-tucks, pleats formed from marks, a neckline slit and armholes finished with the lining, and an invisible zipper.
Dress fabrics with good drape, from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; dress hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From lining fabric:

#4402
Fitted Dress Gathered Sheer Yoke

#4404
Sleeveless Sheath Dress with Draped Front

#4401
Sheath Dress with Lace Panel

#4405
Fitted Guipure Collared Dress with Pleats

#4400
Boat Neck Cap Sleeve Pleated A-Line Dress

#4399
V-Neck Cap Sleeve Pleated Sheath Dress

#4408
Contrast V-Neck Shift Dress with Split Cuffs

#4397
Lace Back Fitted Cap Sleeve Dress

Minerva Support
Online