Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
Women's close-fitting ankle-length leggings in stretch knit, cut with one piece per leg (no side seams). A decorative cord is threaded through two buttonholes at the centre front waist and tied in a bow. Drafted to your own measurements. Recommended fabric: knit fabric with medium to high stretch, in natural or blended fibres.
Women's close-fitting ankle-length leggings in stretch knit, cut with one piece per leg (no side seams). A decorative cord is threaded through two buttonholes at the centre front waist and tied in a bow.
Silhouette: Skin-tight from waist to ankle, following the line of the leg.
Length: Ankle length.
Legs: Each leg is one piece with an inside leg seam only; the two legs are joined by the front and back crotch seam.
Waist: Plain waist edge without a separate waistband; two buttonholes at the centre front, backed with a small patch of interfacing, carry the decorative cord.
Finishing: Seams sewn with a stretch or narrow zigzag stitch, or on a 3- or 4-thread overlocker; the ankle hems are turned up and topstitched, with a twin needle to keep the stretch.
Beginner. One pattern piece cut twice, three seams, a turned-up hem and two buttonholes; the main skill is sewing knit fabric with stretch stitches.
Knit fabric with medium to high stretch, in natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: allowance for the hem of the garment – 1.5 cm, other seams – 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches – they must match!

Minerva Support
Online