Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's oversized hoodie in thick knit with dolman sleeves cut in one with the body, a full-length centre front zip, a two-piece hood and two single-welt pockets. Drafted to your own measurements. Recommended fabric: thick knit fabric of natural or blended fibres.
A women's oversized hoodie in thick knit with dolman sleeves cut in one with the body, a full-length centre front zip, a two-piece hood and two single-welt pockets.
Silhouette: Oversized and relaxed; the body blouses over the hem band, which sits at the hip.
Sleeves: Dolman sleeves cut in one with the front and back, wide at the armhole, eased into deep folded cuffs at the wrist.
Collar: Hood made of two pieces joined by a centre seam, with the front edge turned under twice by 1 cm and topstitched.
Closure: Zip along the full centre front, from the hem band to the neckline.
Pockets: Two slanted single-welt pockets on the fronts, with interfaced welts and lining-fabric pocket bags.
Back: One piece cut on the fold, with no centre back seam.
Finishing: Folded hem band, slightly stretched as it is attached; shoulder and side seams pressed towards the back.
Intermediate. Welt pockets cut into knit fabric, a zip set into a knit band, stretch seams on an overlocker or with a zigzag stitch.
Thick knit fabric of natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. You will also need: a zipper (length is indicated on the front pattern piece), lining fabric, fusible interfacing. Seam allowances: all seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From lining fabric:
From fusible interfacing:
Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch the pieces directly on a 3- or 4-thread overlocker.

Minerva Support
Online