Sleeveless Asymmetrical Button Front Sheath Dress
A women's sleeveless sheath dress in thin denim, cut in many panels: an asymmetric right front lapped over the left and held with five buttons, a waist inset with buttoned flaps set into the side seams, a hem band, and a centre back zipper.
When To Wear
- For the office and daytime in spring and summer, on its own or with a short jacket or cardigan.
- In cooler weather over a fine long-sleeved top.
Key Design Features
Silhouette: Fitted sheath with a waist inset seam, shaped by darts and princess seams on the front and back.
Length: Just above the knee.
Neckline: High round neckline finished with interfaced facings; shaped facing panels frame the upper front and upper back.
Sleeves: Sleeveless; armholes finished with facings, turned to the inside and topstitched.
Front: Upper front in separate right and left pieces with darts and princess seams. The right front laps over the left along an asymmetric line and is fixed with five buttons sewn through all layers, so it does not open. The lower front has pleats laid to the markings below the inset and a trimming band at the hem.
Waist: Straight inset band at the waist on the front and back. Two flaps, each with one button, are sewn into the side seams at the inset.
Closure: Zipper in the centre back seam.
Back: Centre back seam, darts on the upper back, princess seams on the lower back, a back inset and a trimming band at the hem.
Finishing: Seams overlocked and pressed towards the insets and trimming bands; hem turned up 1.5 cm and topstitched.
Level Of Difficulty
Intermediate. Many panels to match, princess seams, facings clipped into corners, armholes faced in two stages, and a centre back zipper.
Fabric Recommendations
Thin denim.
Additional Supplies
- 1 zipper
- Fusible interfacing (neck and front facings)
- 7 buttons (5 on the front, 1 on each flap)
Cutter's Must
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm; dress hem allowance 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). The labels on the pattern pieces are written on the right side of the fabric!
From main fabric:
- Upper Back – 2 pieces
- Center Lower Back – 2 pieces
- Lower Side Back – 2 pieces
- Upper Left Front – 1 piece
- Upper Right Front – 1 piece
- Side Front – 2 pieces
- Lower Front – 1 piece
- Back Inset – 2 pieces
- Back Trimming – 1 piece
- Front Inset – 1 piece
- Front Trimming – 1 piece
- Back Facing – 4 pieces
- Left Front Facing – 2 pieces
- Right Front Facing – 2 pieces
- Flap – 2 pieces
From fusible interfacing:
- Back Facing – 2 pieces
- Left Front Facing – 1 piece
- Right Front Facing – 1 piece
Sewing Instructions
- Fuse interfacing to the facing pieces.
- Stitch the darts on the Upper Back pieces and press the dart depths towards the center back edge. Stitch the Back Facing to the Upper Back, clipping into the corner. Clip the seam allowances at the curves and press them towards the facing. Stitch the Back Inset to the Upper Back, press the seam allowances towards the inset and overlock.
- Stitch the princess seams of the lower back (Center Lower Back to Lower Side Back), press the seam allowances towards the center and overlock. Stitch the lower back to the Back Inset, press the seam allowances towards the inset and overlock.
- Overlock the center back edges separately. Stitch the center back seam from the zipper mark downwards and press the seam allowances open. Insert the zipper. Stitch the Back Trimming to the back, press the seam allowances towards the trimming and overlock.
- Stitch the darts on the upper fronts and press the dart depths downwards. Stitch the princess seams of the upper front (Upper Right Front and Upper Left Front to Side Front), press the seam allowances towards the center and overlock.
- Stitch the Right Front Facing and Left Front Facing to the upper fronts, clipping into the corners. Clip the seam allowances at the curves and press them towards the facing. Overlock the center edge of the Upper Left Front.
- Stitch the shoulder seams and press the allowances open. Stitch the shoulder seams of the inner facings (the second set of Back Facing, Right Front Facing and Left Front Facing pieces) and press the allowances open. Overlock the inner edge. Place the inner facing on the dress right sides together and stitch along the right front edge and the back and front neckline. Clip the seam allowances at the curves and trim the corners. Turn the facing to the wrong side, straighten and press. Topstitch the facing along the attachment seam.
- Lap the right front over the left front, matching the marks, and secure with buttons sewn through all layers.
- Stitch the Front Inset to the upper front, press the seam allowances towards the inset and overlock. Stitch the Front Trimming to the Lower Front, press the seam allowances towards the trimming and overlock. Fold and secure the pleats according to the markings. Stitch the Lower Front to the upper front, press the seam allowances upwards and overlock.
- Fold each Flap in half lengthwise, right sides together, and stitch. Trim the seam allowances at the corners, turn right side out and press.
- Stitch the side seams, inserting the flaps, press the seam allowances towards the back and overlock.
- Stitch the side seams of the inner facings and press the allowances open. Face the armholes in two stages: first the back, then the front. Clip the seam allowances at the curves, turn the facings to the inside and press. Topstitch the facing along the attachment seam. Attach the facing to the zipper tape.
- Overlock the lower edge of the dress, press it to the wrong side and topstitch.
- Sew the buttons onto the flaps.