Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4364
#4366

Sleeveless Wrapped V-Neck Sheath Dress

Pattern #4365

A women's sleeveless sheath dress with a wrap-effect front: a pleated front panel laid over a left front panel, framed by shaped front and back yokes that form a sweetheart V-neckline and wide shoulder straps. Invisible zipper in the centre back seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Wrapped Bodice Sheath Dress

A women's sleeveless sheath dress with a wrap-effect front: a pleated front panel laid over a left front panel, framed by shaped front and back yokes that form a sweetheart V-neckline and wide shoulder straps. Invisible zipper in the centre back seam.

When To Wear

  • For the office and daytime events in warm weather, with a jacket or cardigan over it.
  • For evenings out and dinners, with heels.

Key Design Features

Silhouette: Fitted sheath, straight from the hips to the hem.

Length: Above the knee.

Neckline: Sweetheart V-neck formed by the front yokes. The upper edges of the front panels are turned in and topstitched and sit below the yokes.

Sleeves: Sleeveless. The yokes extend over the shoulders as wide straps; they are cut double, the upper yokes interfaced and the lower yokes acting as facings for the neckline and armholes.

Front: Two overlapping panels. The front panel has several pleats folded downwards that run towards one side seam; the left front panel has one pleat. The panels are basted together at the side seams.

Back: Two back pieces with a centre back seam and waist darts; the back neckline between the yokes is turned in 1.5 cm and topstitched.

Closure: Invisible zipper in the centre back seam.

Finishing: Side seams of the dress and yokes stitched in one continuous seam; yoke facings stitched in the ditch; 2 cm hem sewn by hand with blind stitches.

Level Of Difficulty

Intermediate. Pleats laid to markings, self-faced yokes finishing the neckline and armholes, an invisible zipper and a blind-stitched hem.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Invisible zipper
  • Fusible interfacing (upper front and back yokes)

Cutter's Must

From main fabric:

  • Back – 2 pieces
  • Front – 1 piece
  • Left Front – 1 piece
  • Front Yoke – 4 pieces (2 upper, 2 lower)
  • Back Yoke – 4 pieces (2 upper, 2 lower)

From fusible interfacing:

  • Front Yoke – 2 pieces (upper yokes)
  • Back Yoke – 2 pieces (upper yokes)

Sewing Instructions

  1. Fuse interfacing to the upper Front Yoke and Back Yoke pieces.
  2. Stitch the waist darts on the back. Press the dart depths towards the center.
  3. Serge the center back edges separately on each piece. Stitch the center back seam from the zipper mark to the hem and press the seam allowances open. Insert the invisible zipper. Serge the upper edge of the back, fold it to the inside and topstitch.
  4. Serge the upper and lower edges of the Left Front. Fold the upper edge to the inside and topstitch. Fold the pleat, matching the straight marks; press the pleat depth downwards.
  5. Serge the upper edge of the Front. Fold the seam allowance to the inside and topstitch. Fold the pleats on the Front, starting from the lowest one; press the pleat depths downwards. Lay the Front over the Left Front and baste them together along the side edges.
  6. Stitch the shoulder seams of the upper yokes and press them open. Stitch the upper yokes to the front and back. Press the seam allowances towards the yokes.
  7. Stitch the shoulder seams of the lower yokes (yoke facings) and press them open. Stitch the lower yokes to the upper yokes along the neckline, right sides together. Clip the seam allowances, turn the lower yokes to the wrong side and press. Stitch the armholes in two steps: first the front armhole, then the back armhole. Clip the seam allowances, turn and press. Stitch the side seams of the dress and the yokes in one continuous seam. Serge the seam allowances only on the main front and back. Fold under the seam allowances of the lower yokes and topstitch them in the ditch of the yoke seam.
  8. Serge the hem allowance, press it to the wrong side and hem with blind stitches.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?