Yoked Collared Button-Front Belted Dress
A women's sleeveless, knee-length dress in three fabrics: a front and back yoke with a shirt collar on a stand, a princess-seamed body and a deep band at the hem. The front yoke has a short three-button placket; the dress closes with a zipper in the left side seam and is worn with a belt through loops.
When To Wear
- In spring and summer for the office or daytime events.
- Over a thin top or with a cardigan in cooler weather.
Key Design Features
Silhouette: Fitted through the bodice by princess seams, flaring to the hem.
Length: Knee length, with a separate lower band on the front and back; hem turned up and topstitched.
Collar: Shirt collar on a stand, both fused.
Front: Front yoke in two pieces with a fused placket, lapped right over left and fastened with 3 buttons.
Closure: Concealed zipper in the left side seam.
Sleeves: Sleeveless; armholes bound with a 4 cm bias strip folded in half and topstitched.
Back: One-piece back yoke, centre back seam and princess seams.
Waist: Belt threaded through belt loops sewn at waist level; tied at the back.
Finishing: Colour blocking: fabric 1 for the yokes and collar, fabric 2 for the princess-seamed body, belt and loops, fabric 3 for the lower band.
Level Of Difficulty
Intermediate. Collar on a stand, a buttoned yoke placket, princess seams, a side-seam concealed zipper and bias-bound armholes.
Fabric Recommendations
Dress fabrics in three colours, of natural or blended fibres.
Additional Supplies
- Concealed zipper
- 3 buttons
- Fusible interfacing (collar, collar stand, front yoke placket)
Cutter's Must
From main fabric 1:
- Back yoke - 1 piece
- Front yoke - 2 pieces
- Collar - 2 pieces
- Collar stand - 2 pieces
From main fabric 2:
- Back center — 2 pieces
- Back side -2 pieces
- Front side — 2 pieces
- Front center — 1 piece
- Belt — 1 piece
- Belt loops — 1 piece
From main fabric 3:
- Lower front band — 1 piece
- Lower back band — 1 piece
From fusible interfacing:
- Collar — 1 piece
- Collar stand — 1 piece
Sewing Instructions
- Fuse fusible interfacing to the collar, collar stand, and the inner of the front yoke placket. Make buttonholes according to markings.
- Fold the upper collar with the lower collar right sides together. Stitch the ends and the outer edge of the collar. Trim seam allowances. Turn the collar right side out, shape, and press. Fold the collar stand pieces right sides together, insert the finished collar between them, align notches, and stitch, simultaneously stitching the ends of the collar stand. Start and end the stitching strictly at the marked seam line for attaching the collar stand. Turn the finished collar right side out and press.
- Stitch the center back seam. Overlock the seam allowance and press it to the left side. Stitch the princess seams. Overlock the seam allowances and press them towards the center panels. Attach the lower parts to the front and back. Overlock the seam allowances and press them downwards.
- Fold the seam allowance of the inner placket to the wrong side and press. Topstitch the folded edge onto the yoke. Place the right yoke over the left, aligning the center lines, and secure along the lower edge. Attach the yoke to the front. Overlock the seam allowance and press it downwards. Attach the back yoke to the back. Overlock the seam allowance and press it upwards.
- Stitch and overlock the shoulder seams. Press the seam allowances towards the back.
- Attach the outer collar stand to the neckline. Fold the seam allowance of the inner collar stand inwards and topstitch it into the seam of the outer collar stand attachment.
- Cut a bias binding 4 cm wide and a length equal to the armhole length + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the bias binding along the armhole edge on the right side, extending the ends, and stitch. Fold the bias binding to the wrong side, clip the seams, and topstitch along the fold onto the main piece. Press the seam.
- Overlock the left side seams separately, stitch them from the mark downwards, and press the seam allowances open. Insert the zipper. Stitch the right side seam, press the seam allowances towards the back, and overlock.
- Overlock the hem of the dress. Fold the seam allowances inwards and topstitch.
- Sew on buttons.
- Fold the belt loop piece in half lengthwise, right sides together, and stitch along the long edge. Turn right side out, centering the seam, and press. Cut into the required number of belt loops. Attach the belt loops at the waist level.
- Fold the belt piece in half lengthwise, right sides together, and stitch, leaving a small opening for turning. Trim seam allowances at the corners, turn right side out, and press. Sew the opening closed. Thread the belt through the belt loops.