Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's sleeveless sheath dress with a waist seam and an asymmetric two-layer collar, gathered between markings so it falls in folds across the front. Armholes bound with bias binding, a separate tie belt and a concealed zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres that drape well.
A women's sleeveless sheath dress with a waist seam and an asymmetric two-layer collar, gathered between markings so it falls in folds across the front. Armholes bound with bias binding, a separate tie belt and a concealed zipper in the left side seam.
Silhouette: Fitted sheath with a seam at the waist.
Length: To the knee.
Collar: Asymmetric collar made of right and left halves, each cut double and joined at the centre. It is gathered between the X marks; the right collar lies over the upper right front and the upper left front is joined to the collar, so the folds cross the front diagonally.
Sleeves: Sleeveless. Armholes finished with a 4 cm bias strip folded in half, turned to the inside and topstitched along the fold.
Front: Upper front in right and left pieces, with a dart on the upper left front. The lower front has a centre panel and two side panels.
Back: Upper and lower back joined at the waist, with darts and a centre back seam.
Closure: Concealed zipper in the left side seam.
Waist: Waist seam on the front and back; a separate self-fabric tie belt.
Finishing: Seams overlocked; hem turned up 3 cm and topstitched.
Intermediate. An asymmetric gathered collar set to matching marks, bias-bound armholes, a waist seam and a concealed side zipper.
Dress fabrics of natural or blended fibres that drape well.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; dress hem allowance – 3.0 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match! Attention! The inscriptions on the patterns are made on the right side!
Note: the labels on the pattern pieces are written on the right side of the fabric.
From main fabric:

#4350
Boat Neck Cap Sleeve Geometric Panel Dress

#4354
Fitted Dress With Pleated Front Tab

#4349
Fitted Sleeveless Asymmetric Color Block Dress

#4348
Fitted Collared Dress with Flounce

#4356
Sleeveless Crossover Bodice Pleated Dress

#4347
Sleeveless Sheath Dress with Chevron Front Insets

#4357
Yoked Collared Button-Front Belted Dress

#4346
Knit Surplice Dress with Sleeves

Minerva Support
Online