Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless, above-the-knee women's sheath dress with princess seams front and back and three topstitched diagonal insets on each side of the upper front, meeting in a V below a front yoke. Invisible zipper in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres.
A sleeveless, above-the-knee women's sheath dress with princess seams front and back and three topstitched diagonal insets on each side of the upper front, meeting in a V below a front yoke. Invisible zipper in the left side seam.
Silhouette: Fitted sheath shaped by curved princess seams running from the armholes to the hem on the front and back.
Length: Just above the knee.
Neckline: Round neckline, finished together with the armholes by a one-piece front facing and a one-piece back facing, both interfaced.
Sleeves: Sleeveless; armholes faced, stitched in two steps (back, then front).
Front: Centre front panel with three insets on each side, laid in diagonal bands that meet in a V. The lowest inset is a folded strip edged 0.2 cm from the fold; the other two are folded up and topstitched 0.2 cm from the seam. A two-piece front yoke is stitched on above them and topstitched.
Closure: Invisible zipper in the upper part of the left side seam; the facing is attached to the zipper tape.
Back: Centre back seam and two princess seams, no back opening.
Finishing: Hem finished, turned up 2 cm and topstitched.
Intermediate. Layered, topstitched insets that must meet accurately at the centre front, princess seams, an invisible zipper, and an all-in-one neck and armhole facing.
Dress fabrics in natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; dress hem allowance – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From fusible interfacing:

#4346
Knit Surplice Dress with Sleeves

#4348
Fitted Collared Dress with Flounce
#4345
Cap Sleeve Panelled Dress

#4349
Fitted Sleeveless Asymmetric Color Block Dress

#4344
V-Neck Pleated Zipper Dress

#4350
Boat Neck Cap Sleeve Geometric Panel Dress
#4342
Asymmetric Button Front Pencil Dress

#4352
Draped Collar Sheath Dress Tie Waist

Minerva Support
Online