Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4312
#4314

Sleeveless Gathered Mock Neck Front Trim Dress

Pattern #4313

A sleeveless, knee-length women's dress with a straight fitted cut, a stand collar fastened with two buttons and loops, and soft gathers at the front neckline. A 3 cm decorative trim runs along the centre front seam from the collar to the hem and opens into a slit below the neckline. Drafted to your own measurements. Recommended fabric: dress fabrics in natural or blended fibres with added elastane.

Tech. Description

Gathered High Neck Sleeveless Dress

A sleeveless, knee-length women's dress with a straight fitted cut, a stand collar fastened with two buttons and loops, and soft gathers at the front neckline. A 3 cm decorative trim runs along the centre front seam from the collar to the hem and opens into a slit below the neckline.

When To Wear

  • To the office and business meetings in spring and summer.
  • For daytime events, worn with a narrow decorative belt at the waist.

Key Design Features

Silhouette: Straight and close to the body, shaped by back darts.

Length: Knee length.

Collar: Stand collar folded in half lengthwise, its short ends fastened at the front with two thread loops and two buttons; a narrow self-fabric strip (8 × 3 cm) is wrapped around the collar at centre front.

Neckline: The front neckline is gathered from the centre to a marked point on each side.

Front: Two front pieces joined by a centre seam finished with a 3 cm decorative trim; the seam is left open at the top as a slit.

Back: Centre back seam with an invisible zip at the top and a vent at the hem; waist darts.

Finishing: Hem bound with decorative bias binding.

Lining: Front and back lined; armholes finished with the lining. The lining is cut shorter by the length of the vent and hemmed separately.

Level Of Difficulty

Intermediate. A lined vent, an invisible zip, a trim set into the centre front seam, gathers at the neckline and a stand collar with loops.

Fabric Recommendations

Dress fabrics in natural or blended fibres with added elastane.

Additional Supplies

  • Lining fabric
  • Invisible zip
  • 2 buttons
  • Decorative trim, 3 cm wide (length marked on the front pattern piece)
  • Decorative bias binding for the hem
  • Fusible interfacing for the vent

Cutter's Must

From main fabric:

  • Back – 2 pieces
  • Front – 2 pieces
  • Collar – 1 piece

From lining fabric:

  • Front — 2 pieces
  • Back — 2 pieces

Sewing Instructions

  1. Stitch darts on the back. Press seam allowances towards the center.
  2. On both back pieces, duplicate the vent from the wrong side. Overlock the center edges separately on each piece. On the right side, mark the center seam line (vent fold line). Stitch the center edge of the back from the zipper mark to the vent corner. Clip the vent seam allowance corner. Press open the center seam allowances, pressing the zipper opening, press the vent to the left side. Press the right side of the vent 1 cm to the wrong side and topstitch. Topstitch the vent allowances along the top with a machine stitch. Insert the zipper.
  3. Stitch shoulder seams. Overlock seam allowances and press towards the back. Stitch side seams, leaving a 5 cm unstitched section of the left side seam from the bottom edge.
  4. Stitch darts and seams on the lining. Fold the bottom edge of the lining twice by 1 cm and topstitch.
  5. Finish the armholes with the lining in 2 steps: first the front armhole, then the back armhole. Secure the lining to the main fabric along the neckline edge and the center edge of the front. Then treat the pieces as 1 piece.
  6. Place the trim strip on the front with the right side facing inwards and stitch. Fold to the right side and press. Stitch the front pieces up to the mark indicating the slit. The stitching runs along the trim strip. Press open the trim strip. Topstitch the inner edges of the trim strip with a stitch in the attaching seam from the right side.
  7. Along the neckline edge from the center to the mark, make a stitch with loosely tightened stitches and gather.
  8. Make loop fastenings. Fold the collar in half lengthwise and finish the short edges, inserting the loops, starting and ending the stitch strictly at the marked collar line. Cut a piece for the bridge 8 cm long, 3 cm wide. Fold the piece lengthwise with the right side facing inwards and stitch. Turn the bridge out, centering the seam. Wrap the collar with the bridge and attach the bridge allowances to the collar. Insert the outer collar into the neckline. Fold the allowance of the inner collar inwards and topstitch into the attaching seam of the upper collar, leaving an unstitched section in the center. Hand stitch the center section.
  9. Hand stitch the lining to the zipper.
  10. Finish the bottom edge of the garment with decorative bias binding. Stitch the section of the side seam.
  11. Sew on buttons. The dress is recommended to be worn with a decorative belt.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?