Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless women's sheath dress with deeply cut-in armholes and a high halter-style neckline, pleated at the centre front. A contrast inset at the waist joins the lined bodice to the unlined skirt, and a separate sash in the same contrast fabric ties at the front. Drafted to your own measurements. Recommended fabric: silk dress fabrics from natural or blended fibres, with a contrast fabric for the waist insets and the sash.
A sleeveless women's sheath dress with deeply cut-in armholes and a high halter-style neckline, pleated at the centre front. A contrast inset at the waist joins the lined bodice to the unlined skirt, and a separate sash in the same contrast fabric ties at the front.
Silhouette: Fitted sheath with princess seams on the bodice and the skirt, front and back.
Length: About knee length.
Neckline: High halter-style neckline with cut-in armholes. Pleats at the centre front neckline, their depths turned away from the centre. Finished with a double facing that is stitched to the neckline, closed on itself and tacked inside.
Sleeves: Sleeveless; armholes finished by the bodice lining.
Closure: Invisible zipper in the left side seam, ending at the armhole.
Waist: A waist inset in contrast fabric on the front and the back, seamed between the bodice and the skirt. A separate sash, edgestitched at 0.2 cm, ties at the front.
Back: Upper back cut in one centre piece with two side pieces; the skirt has a centre back seam with a slit at the hem.
Finishing: Hem allowance 2 cm and slit allowance 2 cm, hem blind-stitched.
Lining: Bodice lined; the skirt is unlined.
Intermediate. Princess seams in two levels, pleats at the neckline, a bodice lined to the armholes, a double neckline facing, a contrast waist inset, a side invisible zipper and a back slit.
Silk dress fabrics from natural or blended fibres, with a contrast fabric for the waist insets and the sash.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams – 1 cm; dress hem allowance – 2.0 cm; allowance along the slit – 2 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match!
From main fabric:
From contrast fabric:
From lining fabric:
From fusible interfacing:

#4310
Panelled Sheath Dress with Yoke Neckline

#4311
Fitted Sleeveless Dress With Flounces And Bias Trim

#4300
Stand Collar Ruffled Shoulder Sheath Dress

#4312
Square Neck Belted Dress with Side Zip

#4299
Fitted Color Block Dress with Guipure Sleeves

#4313
Sleeveless Gathered Mock Neck Front Trim Dress

#4314
Sleeveless Ruffle Sheath Dress

#4315
Short Sleeve Tie Neck Dress

Minerva Support
Online