Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A sleeveless, fitted women's dress about knee length, with a lined crossover bodice forming a V-neck, pleats drawn towards the left side of the waist and a pleated cascade falling over the left front of the skirt. Drafted to your own measurements. Recommended fabric: double-faced silky dress fabrics from natural or blended fibres.
A sleeveless, fitted women's dress about knee length, with a lined crossover bodice forming a V-neck, pleats drawn towards the left side of the waist and a pleated cascade falling over the left front of the skirt.
Silhouette: Fitted sheath with a straight skirt.
Length: Around the knee.
Neckline: V-neck formed by the crossover upper fronts; the right upper front lies over the left.
Sleeves: Sleeveless; the armholes are finished with the bodice lining.
Front: Both upper fronts have stitched pleats pressed downwards and are lined; the left upper front is joined to the lower front with a seam, and the lower front has darts.
Skirt: A separate fly piece with pleats at the upper edge and a narrow rolled hem on the outer edge is basted to the lower front along the side and upper edges and hangs as a cascade; it is cut shorter than the front by the hem allowance.
Back: Upper and lower back joined at the waist, darts on both, centre back seam with an invisible zipper; the upper back is lined.
Finishing: Hem turned up 3 cm and slipstitched by hand.
Lining: Bodice only (upper fronts and upper back), sewn to the zipper tape at the back.
Intermediate. Pleating to markings, a lined crossover bodice with the neckline and armholes finished by the lining, a rolled-hem cascade and an invisible zipper.
Double-faced silky dress fabrics from natural or blended fibres.
If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: dress hem allowance – 3.0 cm; allowance along the lower edge of the Fly Piece – 0 cm; other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (remember to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches – they must match! The inscriptions on the patterns are made on the right side!
From main fabric:
From lining fabric:
#4290
Keyhole Panel Sheath Dress

#4299
Fitted Color Block Dress with Guipure Sleeves

#4288
V-Neck Cap Sleeve Peplum Bow Dress

#4300
Stand Collar Ruffled Shoulder Sheath Dress

#4287
Wide Bow Neckline Sheath Dress with Broad Collar

#4282
Fitted Sleeveless Dress with Pleated Bodice

#4306
Pleated Halter Neck Sheath Dress with Sash
#4279
Sleeveless Belted Mini Dress with Flounces

Minerva Support
Online