Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted sleeveless top in knit fabric, with curved seams that divide the front into a centre panel and two side panels, and shoulder yokes joining front and back. Neck and armholes are finished with bias binding. Drafted to your own measurements. Recommended fabric: knit fabric with medium stretch, in natural or blended fibres.
A women's fitted sleeveless top in knit fabric, with curved seams that divide the front into a centre panel and two side panels, and shoulder yokes joining front and back. Neck and armholes are finished with bias binding.
Silhouette: Close-fitting, shaped by the curved front panel seams.
Length: Hip length.
Neckline: Round neck finished with a 4 cm bias strip folded in half and topstitched; bar tack at the yoke seam.
Sleeves: Sleeveless; armholes finished with a 4 cm folded bias strip, with a bar tack at the side seam.
Front: Centre front panel and two side panels.
Back: One piece, joined to the front by separate shoulder yokes.
Finishing: Seams sewn with a stretch or narrow zigzag stitch; hem twin-needle topstitched.
Beginner. A few pieces, bias binding on neck and armholes and a simple hem; some practice with knit fabric helps.
Knit fabric with medium stretch, in natural or blended fibres. The side panels and yokes can be cut in a contrasting colour.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance – 1.5 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.
Tip: When sewing knit fabrics, use a special elastic stitch or a narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. For the hem, use a twin needle to maintain elasticity.
When stitching pieces, pay attention to the notches - they must match!

Minerva Support
Online