Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted short-sleeved top in knit fabric, with curved seams on the front that separate a centre panel from two side panels. The round neck is finished with a bias binding. Drafted to your own measurements. Recommended fabric: knit fabric with medium stretch, in natural or blended fibres.
A women's fitted short-sleeved top in knit fabric, with curved seams on the front that separate a centre panel from two side panels. The round neck is finished with a bias binding.
Silhouette: Close-fitting, shaped by the curved front panel seams.
Length: Hip length.
Neckline: Round neck finished with a 4 cm bias strip folded in half and topstitched; bar tack at the shoulder seam.
Sleeves: Short set-in sleeves, sewn in one line with the side seams.
Front: Centre front panel and two side panels; the side panels run over the shoulders and include the armholes.
Back: One piece, no seams.
Finishing: Seams sewn with a stretch or narrow zigzag stitch; hems twin-needle topstitched.
Beginner. Four pattern pieces, a bias neck binding and simple hems; some practice with knit fabric helps.
Knit fabric with medium stretch, in natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance for the garment bottom and sleeve hem – 1.5 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.
Tip: Cut pieces from knit fabrics are stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.
When stitching pieces, pay attention to the notches - they must match!

Minerva Support
Online