Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4262
#4264

Sleeveless Pleated Neck A-Line Dress

Pattern #4263

A sleeveless women's dress with a waist seam, a flared skirt and two small pleats at the front neckline. The bodice is shaped with waist darts, and the dress closes with a concealed zip in the left side seam. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Sleeveless Pleated Neck A-Line Dress

A sleeveless women's dress with a waist seam, a flared skirt and two small pleats at the front neckline. The bodice is shaped with waist darts, and the dress closes with a concealed zip in the left side seam.

When To Wear

  • Office days and daytime events in spring and summer, alone or under a jacket or cardigan.
  • Family celebrations and dinners, with heeled shoes.

Key Design Features

Silhouette: Fitted bodice with a waist seam at the natural waist; flared A-line skirt.

Length: Above the knee.

Neckline: Round neckline with two pleats on the front, their folds turned away from the centre.

Sleeves: Sleeveless; neckline and armholes finished with one combined interfaced facing.

Front: Upper front in one piece with waist darts pressed towards the centre.

Closure: Concealed zip in the left side seam; the facing is turned under and stitched to the zip tape.

Back: Upper back in two pieces with a centre back seam and waist darts; the lower back is one piece.

Skirt: Lower front and lower back each cut in one piece, flaring from the waist seam to the hem.

Finishing: Seams overlocked; 1.2 cm hem turned up and topstitched.

Level Of Difficulty

Intermediate. A concealed side zip, a combined neck and armhole facing stitched in two steps, neckline pleats and a waist seam.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (front and back facings)
  • Concealed zip

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance for the dress bottom – 1.2 cm; other allowances – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).

From main fabric:

  • Upper Back – 2 pieces
  • Lower Back – 1 piece
  • Upper Front – 1 piece
  • Lower Front – 1 piece
  • Back Facing – 1 piece
  • Front Facing – 1 piece

From fusible interfacing:

  • Back Facing – 1 piece
  • Front Facing – 1 piece

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

  1. Fuse interfacing to the Back Facing and the Front Facing.
  2. Stitch the waist darts on the Upper Back and Upper Front pieces and press them towards the centre. Fold the pleats at the front neckline, with the folds turned away from the centre, and baste them in place.
  3. Stitch the centre back seam of the Upper Back, press the seam allowances to the left side and overlock. Stitch the Upper Back to the Lower Back, press the seam allowances upwards and overlock. Stitch the Upper Front to the Lower Front, press the seam allowances upwards and overlock.
  4. Overlock the left side seam edges separately. Stitch the section from the armhole to the first mark and the section from the second mark to the hem. Press the seam allowances open. Insert the concealed zipper. Stitch the right side seam, press the seam allowances towards the back and overlock.
  5. Stitch the shoulder seams. Press the seam allowances towards the back and overlock.
  6. Stitch the shoulder seams and the right side seam of the facings and press the seam allowances open. Overlock the lower edge and the left side edges of the facing. Place the facing on the dress, right sides together, and stitch around the neckline; clip the seam allowances on the curves. Turn the facing to the inside and press. Stitch the armholes with the facing in two steps: first the back, then the front. Clip the seam allowances on the curves and press. Turn under the left side edges of the facing and stitch them to the zipper tape. Tack the facing to the dress at the side seam allowances and the centre back seam.
  7. Overlock the hem allowance of the dress, press it to the wrong side and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?