Pattern

CUTTER'S MUST

• From main fabric:
• 1. Upper right center part - 1 QTY
• 2. Upper left center part - 1 QTY
• 3. Upper FRONT PANEL SIDE PANEL - 2 QTY
• 4. Upper BACK PANEL SIDE PANEL — 2 QTY
• 5. Upper BACK PANEL center part — 2 QTY
• 6. Lower BACK PANEL SIDE PANEL — 2 QTY
• 7. Lower BACK PANEL center part — 2 QTY
• 8. Lower FRONT PANEL part — 1 QTY
• 9. SLEEVE — 2 QTY
• 10. FRONT PANEL FACING — 2 QTY
• 11. BACK PANEL FACING — 2 QTY
• 12. Rose — 4 QTY
• 13. Right part YOKE — 1 QTY
• From FUSIBLE INTERFACING:
• 1. BACK PANEL FACING — 2 QTY
• 2. FRONT PANEL FACING — 2 QTY

Sewing Instructions

1. Fuse FUSIBLE INTERFACING to the designated pieces. Stitch the shoulder SEAM ALLOWANCES of the FACINGS. Press SEAM ALLOWANCES open. Overlock the outer edge of the FACINGS.
2. Stitch the darts on the center BACK PANEL. Press the dart folds towards the center. Stitch the princess seams of the BACK PANEL on the upper parts. Overlock the SEAM ALLOWANCES and press them towards the center part. Stitch the princess seams of the BACK PANEL on the lower parts. Overlock the SEAM ALLOWANCES and press them towards the center part. Stitch the upper and lower parts of the BACK PANEL. Overlock the SEAM ALLOWANCES and press them downwards. Overlock the center seam of the BACK PANEL. Stitch the seam from the bottom up to the NOTCH for the ZIPPER. Insert the ZIPPER.
3. Stitch the straight edges of the rose. Press SEAM ALLOWANCES open. Fold the roses right sides out and secure with a temporary stitch along the outer contour. Finish the outer edge of the rose with BIAS BINDING. Along the inner edge, stitch with a loosened thread and gather. Form the decorative rose pattern and attach it to the right FRONT PANEL. Attach the FRONT PANEL YOKE to the FRONT PANEL. Overlock the SEAM ALLOWANCES.
4. Stitch the princess seams of the FRONT PANEL. Overlock the SEAM ALLOWANCES and press towards the center.
5. Stitch the shoulder SEAM ALLOWANCES of the upper part. Overlock the SEAM ALLOWANCES and press towards the BACK PANEL. Finish the neckline. Fold the FACINGS to the wrong side and secure to the shoulder seams with hand stitches.
6. Cut the dart depth in the middle, stopping 2-3 cm from the apex. Along the contour of the decorative dart on the lower FRONT PANEL, stitch with a loosened thread and gather. Stitch the dart. Trim the depth with an overlocker. Overlap the right upper part onto the left and secure with a temporary stitch along the lower edge. Stitch the upper and lower parts of the FRONT PANEL. Overlock the SEAM ALLOWANCES and press downwards.
7. Overlock the hem of the SLEEVE, press to the wrong side and topstitch. Set the SLEEVE into the armhole, aligning the NOTCHES. Trim the SEAM ALLOWANCES to 0.5 cm from the stitching and finish the entire armhole contour with BIAS BINDING.
8. Stitch the side SEAM ALLOWANCES. Overlock the SEAM ALLOWANCES and press towards the BACK PANEL. Place bar tacks at the side seam at the armhole level.
9. Overlock the hem of the garment, press to the wrong side and topstitch.