Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A long women's flared skirt on a deep hip yoke: the outer yoke is ruched over a smooth interfaced inner yoke, the skirt is cut in panels with a gathered centre panel front and back, and it closes with an invisible zip in the left side seam. Drafted to your own measurements. Recommended fabric: silky, well-draping fabrics of natural fibres or with man-made fibres added: silk, viscose.
A long women's flared skirt on a deep hip yoke: the outer yoke is ruched over a smooth interfaced inner yoke, the skirt is cut in panels with a gathered centre panel front and back, and it closes with an invisible zip in the left side seam.
Silhouette: Fitted through the yoke, then flaring to a wide hem.
Length: Long, well below mid-calf.
Waist: No waistband. The yoke sits from the waist over the upper hip; its outer layer is gathered along the side edges and along marked lines, then stitched down to the inner yoke along the gathering lines. The upper edge is faced by the inner yoke and topstitched 0.5 cm from the edge.
Skirt: Front and back each made of a centre panel and two side panels. The centre panel is gathered at the top before it is joined to the side panels, so soft gathers fall from under the yoke.
Closure: Invisible zip in the left side seam; the inner yoke edges are stitched to the zip tape.
Finishing: Panel seams overlocked and pressed towards the centre panel; hem turned twice by 1 cm and topstitched.
Intermediate. Controlled gathering on slippery fabric, a two-layer ruched yoke, and an invisible zip set between the yoke layers.
Silky, well-draping fabrics of natural fibres or with man-made fibres added: silk, viscose.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance — 2 cm, other seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match!

Minerva Support
Online