Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4117
#4119

Asymmetrical Hem Ruffled Skirt

Pattern #4118

A women's skirt about knee length with an asymmetrical hem dropping to a point, a yoke at the waist with the centre panel gathered into it, and a faced left side panel with a short gathered frill below it. Invisible zip in the left side seam, no waistband. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.

Tech. Description

Asymmetrical Hem Ruffled Skirt

A women's skirt about knee length with an asymmetrical hem dropping to a point, a yoke at the waist with the centre panel gathered into it, and a faced left side panel with a short gathered frill below it. Invisible zip in the left side seam, no waistband.

When To Wear

  • In summer and early autumn with a fitted top or blouse tucked in.
  • For daytime events and dinners, with a fitted jacket or knit on top.

Key Design Features

Silhouette: Flared from the hip, with the fullness concentrated in the gathered centre panel.

Length: Around the knee, longer at the point of the hem.

Waist: Sits at the waist without a waistband. The yoke is finished inside with an interfaced top facing, understitched 0.2 cm from the seam and sewn by hand to the zip tape.

Skirt: Front and back are built the same way: a right side panel, a centre panel gathered along its top edge into the yoke, and a left side panel. The lower edge of the left side panel is faced, and a gathered lower part is sewn under it; the facing is topstitched to the skirt along a marked line.

Closure: Invisible zip in the left side seam.

Finishing: Seams overlocked; hem overlocked, pressed up 1.2 cm and topstitched. Unlined.

Level Of Difficulty

Intermediate. Gathering into a yoke seam, a faced panel with a gathered frill set underneath, an invisible zip and a top facing finished to the zip tape.

Fabric Recommendations

Dress fabrics of natural or blended fibres.

Additional Supplies

  • Fusible interfacing (left side facings, top facings)
  • 1 invisible zip

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: Hem allowance – 1.2 cm, other seams – 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90cm to 150cm) to determine how much material you will need.

  • From main fabric:
    • Yoke – 2 pieces
    • Right Side – 2 pieces
    • Center Part – 2 pieces
    • Left Side Piece – 2 pieces
    • Left Side Facing – 2 pieces
    • Lower Part – 2 pieces
    • Top Facing – 2 pieces
  • From fusible interfacing:
    • Left Side Facing – 2 pieces
    • Top Facing – 2 pieces

Sewing Instructions

  1. Reinforce facings with fusible interfacing.
  2. Back skirt: stitch the Right Side to the Center Part, press the seam allowances towards the center and overlock. Along the upper edge of the Center Part, sew a line of long, loose stitches and gather. Stitch the Yoke to the skirt, press seam allowances upwards and overlock.
  3. Place the Left Side Facing on the Left Side Piece, right sides together, and stitch the bottom edge. Turn the facing to the wrong side and press. Along the upper edge of the Lower Part, sew a line of long, loose stitches and gather. Place the Lower Part on the Left Side Facing, right sides together, and stitch. Press seam allowances upwards and overlock. Topstitch the facing onto the skirt along the marked line.
  4. Stitch the Left Side Piece to the skirt, press seam allowances towards the center and overlock.
  5. Assemble the front skirt in the same way.
  6. Overlock the left side seam edges separately. Stitch the left side seam from the zipper notch to the hem, press the seam allowances open. Insert the invisible zipper. Stitch the right side seam. Press seam allowances towards the back and overlock.
  7. Stitch the right side seam of the Top Facings, press the seam allowances open. Overlock the bottom edge. Place the facing on the skirt right sides together and stitch the top edge. Topstitch the seam allowances onto the facing at a distance of 0.2 cm from the stitching line. Fold the facing to the wrong side, press. Fold under the raw edges of the facing and sew to the zipper tape.
  8. Overlock the hem allowance of the garment, press to the wrong side and topstitch.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Additional options

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?