Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's fitted, hip-length jacket in faux leather with an asymmetric front: a separating zip hidden under a curved overlap panel, a large two-part collar on a stand, princess seams and two-piece sleeves. Fully lined. Drafted to your own measurements. Recommended fabric: faux leather.
A women's fitted, hip-length jacket in faux leather with an asymmetric front: a separating zip hidden under a curved overlap panel, a large two-part collar on a stand, princess seams and two-piece sleeves. Fully lined.
Silhouette: Fitted, shaped by princess seams on the front and back.
Length: Short, ending at the hip.
Collar: Wide asymmetric collar cut in left and right parts joined at the centre, attached to a stand; edges topstitched 0.2 cm.
Closure: Off-centre separating zip under a curved overlap panel attached to the right side front; the overlap edge is fastened with a hook and eye.
Front: Centre front and side front pieces; the centre front is cut double and self-faced along the neckline, front edge and hem.
Sleeves: Long, two-piece set-in sleeves with topstitched seams.
Back: Centre back seam and princess seams from the armholes, all topstitched 0.2 cm; back neck facing.
Finishing: Seams topstitched 0.2 cm from the seam line; hems of body and sleeves topstitched.
Lining: Full lining of back, side fronts and sleeves, attached to the princess seams at the front; the jacket is turned through an opening in the sleeve lining.
Advanced. Faux leather, a zip set between the centre front and the overlap panel, a collar sewn partly as a single layer and partly between both layers, and bagged lining.
Faux leather.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm. Hem allowance for the bottom of the garment and sleeve hem – 4 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces).
From main fabric:
From lining fabric:
Attention: back pieces from lining are cut with the width of the back neckline facing subtracted.
When stitching pieces, pay attention to the notches - they must match!
#4101
Fitted Stand Collar Zipper Jacket

#4973
Leather or Faux Leather Jacket

#5320
Fitted Jacket Fur Collar Cuffs Zippered Pockets

#5322
Leather Utility Jacket with Zipper & Patch Pockets
#2871
Leather Moto Jacket with Zippers

#5698
Hooded Faux Fur Trim Jacket

#5699
Cropped Faux Fur Jacket with Carabiner Strap Closures

#5700
Faux Fur Jacket with Front and Cuff Zippers

Minerva Support
Online