Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#4091
#4093

Knit Hoodie with Pockets

Pattern #4092

A women's sleeveless dress for knit fabric, above knee length, with a drawstring hood, a seam under the bust and gathered fullness on the lower front. Two side pockets with gathered edges form soft drapes at the hips. Drafted to your own measurements. Recommended fabric: knit fabric of medium or high stretch from natural or blended fibres.

Tech. Description

Knit Hoodie Dress with Pockets

A women's sleeveless dress for knit fabric, above knee length, with a drawstring hood, a seam under the bust and gathered fullness on the lower front. Two side pockets with gathered edges form soft drapes at the hips.

When To Wear

  • For everyday wear in spring and summer, with trainers or sandals.
  • Over a long-sleeved top or with leggings in cooler weather.

Key Design Features

Silhouette: Straight, close to the body, with gathers below the bust seam on the front.

Length: Above the knee.

Hood: Two-part hood: a double front part with a 2 cm topstitched casing along the edge, and a back part with a curved centre seam; a cord runs through the casing and exits through two buttonholes.

Front: Upper front shaped with darts, joined to the lower front by a horizontal seam; the lower front is gathered between the pocket openings.

Pockets: Side pockets cut with a separate side piece; the lower and centre edges of each pocket are gathered, giving draped folds over the hips.

Sleeves: Sleeveless; armholes bound with a folded 4 cm bias strip turned to the inside and topstitched.

Back: Cut in two halves with a centre back seam running from neckline to hem.

Finishing: Hem overlocked, turned up 1.5 cm and topstitched (twin needle or coverstitch).

Level Of Difficulty

Intermediate. Gathered draped pockets, a hood with a double front part, casing and buttonholes, bias-bound armholes on a stretch fabric.

Fabric Recommendations

Knit fabric of medium or high stretch from natural or blended fibres.

Additional Supplies

  • Decorative cord for the hood
  • Bias tape (armholes)

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: hem allowance – 1.5 cm, other seams 0.8 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

From main fabric:

  • Upper Front – 1 piece
  • Back – 2 pieces
  • Lower Front – 1 piece on fold
  • Pocket – 2 pieces
  • Side – 2 pieces
  • Front Hood – 2 pieces
  • Back Hood – 2 pieces

Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlock machine.

Sewing Instructions

  1. Mark and stitch the darts on the Upper Front. Trim the dart excess with the overlocker.
  2. Stitch the centre back seam. Overlock the allowances and press them to the left.
  3. Run a gathering stitch (loose tension) along the lower and centre edges of each Pocket and gather. Stitch the Side to the Pocket along the lower and centre edges. Overlock the allowances. Place the Pocket and the Lower Front right sides together and stitch the pocket opening. Turn the Pocket to the wrong side and baste it to the Lower Front at the side and upper edges.
  4. Run a gathering stitch (loose tension) along the upper edge of the Lower Front between the pocket openings and gather. Stitch the Upper Front to the Lower Front. Overlock the allowance and press it upwards.
  5. Stitch the shoulder seams. Overlock the allowances and press them towards the back.
  6. Cut a bias strip 4 cm wide and as long as the armhole + 5 cm. Fold it in half lengthwise, wrong sides together, and press. Place the binding on the right side of the armhole, raw edges matching, and stitch. Turn the binding to the wrong side and topstitch along the fold onto the dress. Press the seam.
  7. Stitch the side seams. Overlock the allowances and press them towards the back. Bar tack the binding at the side seam.
  8. Make the buttonholes on one Front Hood piece. Stitch the upper edge of the Front Hood. Place the Front Hood pieces right sides together and stitch along the concave edge. Turn right side out. Topstitch 2 cm from the hood edge to form a casing. Stitch the curved centre seam of the Back Hood. Overlock the allowance. Stitch the Front Hood to the Back Hood. Overlock the allowances. Stitch the hood into the neckline and overlock the allowance. Thread the cord through the casing.
  9. Overlock the lower edge of the dress. Turn it to the wrong side, press and topstitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?