Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's short-sleeved romper with a stand collar, a five-button front placket that ends below the waist seam, pleats on the front bodice and shorts with pockets and turn-up cuffs. The back is cut without a waist seam. Drafted to your own measurements. Recommended fabric: firm dress fabrics of natural or blended fibres.
A women's short-sleeved romper with a stand collar, a five-button front placket that ends below the waist seam, pleats on the front bodice and shorts with pockets and turn-up cuffs. The back is cut without a waist seam.
Silhouette: Bodice with a waist seam on the front; back shaped by darts; loose shorts.
Length: Short shorts.
Collar: Stand collar, interfaced on the inner layer.
Front: Front bodice pieces with pleats below the shoulder seam, pressed towards the centre. Interfaced placket with 5 buttons, buttonholes on the right side; the placket runs past the waist seam and is finished with a stitched corner at the base.
Sleeves: Short set-in sleeves.
Pockets: Side pockets with a faced opening on the front halves of the shorts, the pocket bag stitched to a side piece.
Back: Two back pieces running from shoulder to leg hem, with a centre back seam and darts.
Waist: Horizontal seam on the front; belt loops at the side seams, centred over this seam.
Legs: Turn-up cuffs, tacked at the side seams and inseams.
Intermediate. Pleats laid to marks, a placket with a stitched corner, a stand collar, in-seam side pockets, buttonholes and turn-up cuffs.
Firm dress fabrics of natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all seams 1 cm, hem allowance for the bottom of the garment - 2 cm, sleeve hem - 1.5 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.
From main fabric:
From fusible interfacing:
When stitching pieces, pay attention to the notches - they must match!
#4049
Flutter Sleeve V-Neck Romper

#4045
Halter Neck Harem Jumpsuit

#4044
V-Neck Jumpsuit with Harem Legs
#4035
Sleeveless Cowl Neck Jumpsuit with Dropped Waist

#4033
Halter Neck Silk Blouson Jumpsuit
#4612
Button-Front Ruffled Sleeve Romper
#4728
Padded Bib Overalls Front Zipper

#5219
Overalls with Buckle Straps and Side Buttons

Minerva Support
Online