V-Neck Puff Sleeve Blouse with Ties
Introducing a charming women's blouse pattern featuring a flattering V-neck, artfully puffed sleeves gathered into tied cuffs, and a beautifully fitted silhouette.
When To Wear:
- Casual Elegance: Perfect for elevated everyday wear or stylish weekend outings.
- Office & Business Casual: a sophisticated choice suitable for professional environments.
- Social Gatherings: Ideal for brunches, dinners, or semi-formal events where a chic, comfortable look is desired.
Key Design Features
Silhouette: Elegantly fitted through the bodice with defined waist shaping, flaring gently to the hem.
Neckline: a clean V-neckline, offering a flattering and versatile opening.
Closure: Front button placket with a series of functional buttons.
Sleeves: Voluminous puff sleeves, gathered at the shoulder and finished with shaped cuffs that tie gracefully at the wrist.
Back: Shaped with waist darts for a smooth, complementary fit.
Hem: a classic, straight hip-length hem.
Level Of Difficulty
Intermediate. This pattern involves techniques such as dart construction, setting in gathered sleeves, creating a button placket, and attaching tailored cuffs with ties.
Fabric Recommendations
Opt for blouse-weight fabrics with good drape to best showcase the sleeve volume and bodice shaping:
- Blouse fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing
- 6 buttons
Cutter's Must
If the patterns have a double contour, seam allowances are included. If the contour is single, the patterns are without seam allowances. Seam allowances: all seams 1 cm. Hem allowance – 2 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need.
- From main fabric:
- Back – 2 pieces
- Front – 2 pieces
- Sleeve – 2 pieces
- Cuff – 2 pieces
- Front facing – 2 pieces
- Back neckline facing – 1 piece
- From fusible interfacing:
- Front facing – 2 pieces
- Back neckline facing – 1 piece
Sewing Instructions
When stitching pieces, pay attention to the notches - they must match!
- Fuse interfacing to the designated pieces.
- Stitch waist darts on back pieces, press dart allowances towards the center. Stitch the center back seam, press allowances to the left side and overlock.
- Stitch vertical darts on front pieces, press allowances towards the center and overlock. Stitch waist darts on front pieces, press dart allowances towards the center.
- Stitch side and shoulder seams, press allowances towards the back and overlock.
- Stitch shoulder seams of front facings and back neckline facing, press allowances open. Overlock the outer edge. Place front facings with the garment right sides together and stitch the front edges and the back and front neckline edges. Clip allowances at curves, trim at corners, turn front facings with facing to the wrong side, straighten, press. Secure to the garment at shoulder seams.
- Make a slit on the sleeve along the marked line. Cut a bias strip from the main fabric, 4 cm wide and a length equal to twice the slit length + 4 cm. Fold the bias strip in half lengthwise and press. Press outer allowances towards the center. Finish the sleeve slit with the bias strip.
- Stitch the sleeve seam, press allowances towards the back and overlock. Along the bottom edge of the sleeve and along the sleeve cap, stitch with loosened upper thread and gather. Set sleeves into armholes, press allowances and overlock.
- Fold cuffs right sides together and stitch the short sides and the long side from the corner to the mark. Trim allowances at corners, clip at marks. Turn cuff to the right side, straighten, press. Attach the outer side of the cuff to the bottom of the sleeve. Turn the inner side of the cuff inwards and topstitch into the attachment seam.
- Overlock the hem allowance of the garment, press to the wrong side and topstitch.
- On the right front, overlock buttonholes, on the left front, sew on buttons.
