Raglan Sleeve Balloon Sleeve Sweatshirt

Name: Raglan Sleeve Balloon Sleeve Sweatshirt
Brand: Minerva Patterns
SKU: 2180
Price: 5.00 EUR
Availability: InStock

Pattern #2180

A women's hip-length sweatshirt for knit fabric with raglan sleeves that turn into gathered balloon sleeves below the elbow line, finished with a rib-knit neckband, hem band and cuffs. Drafted to your own measurements. Recommended fabric: knit fabric with low stretch, in natural or blended fibres.

Tech. Description

Raglan Sleeve Balloon Sleeve Sweatshirt

A women's hip-length sweatshirt for knit fabric with raglan sleeves that turn into gathered balloon sleeves below the elbow line, finished with a rib-knit neckband, hem band and cuffs.

When To Wear

Everyday wear in autumn, winter and spring, with jeans, trousers or a straight skirt.
Over a T-shirt or under a coat on cool days.

Key Design Features

Silhouette: Straight, relaxed body drafted without a bust dart; not recommended for larger sizes.

Length: Hip length, gathered into a hem band.

Neckline: Round neckline finished with a folded rib-knit band sewn into a ring and stretched slightly as it is attached.

Sleeves: Raglan, the upper sleeve cut in two parts (front and back) joined by an overarm seam. A separate lower sleeve is gathered into the upper sleeve and gathered again at the wrist into a folded rib-knit cuff.

Front: One piece cut on the fold, pullover with no fastening.

Back: One piece cut on the fold.

Finishing: Side and underarm sleeve seams sewn in one pass; seams sewn with a stretch or narrow zigzag stitch or on a 3- or 4-thread overlocker.

Level Of Difficulty

Beginner. Few pieces and straight seams; the techniques are gathering on a loosened top thread and attaching folded rib bands to knit fabric.

Fabric Recommendations

Knit fabric with low stretch, in natural or blended fibres. Rib knit or a high-stretch knit for the neckband, hem band and cuffs.

Additional Supplies

Rib knit or high-stretch knit for the bands and cuffs (ready-made knit bands can be used instead)

Cutter's Must

If the patterns have a double contour, seam allowances are included. If the contour is single, seam allowances are not included. Seam allowances: all seams 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (do not forget to account for paired and symmetrical pieces). When stitching pieces, pay attention to the notches - they must match! The model is made without a bust dart! Therefore, it is not recommended for larger sizes!

From main fabric:
- Back – 1 piece on fold
- Front – 1 piece on fold
- Back of sleeve – 2 pieces
- Front of sleeve – 2 pieces
- Lower of sleeve – 2 pieces
From rib knit:
- Collar stand – 1 piece
- Bottom facing – 1 piece on fold
- Cuff – 2 pieces

Tip: Knit fabric pieces are stitched with a special elastic or narrow zigzag stitch. The hem allowance is topstitched with a twin needle or on a coverstitch machine to maintain elasticity. You can also stitch pieces directly on a 3- or 4-thread overlocker.

Sewing Instructions

Attach the back of the sleeve to the back, press seam allowances towards the back and overlock.
Attach the front of the sleeve to the front, press seam allowances towards the front and overlock.
Stitch the upper edges of the sleeves, press seam allowances towards the back and overlock.
Along the upper edge of the lower sleeve, stitch with a loosened upper thread and gather. Attach the lower sleeve to the upper, press seam allowances upwards and overlock.
Stitch the side seams, simultaneously with the sleeve seams, press seam allowances towards the back and overlock.
Along the lower edge of the sleeve, stitch with a loosened upper thread and gather, aligning with the pattern. Stitch the cuff into a loop, press seam allowances open. Fold the cuff in half lengthwise, right side out, and press. Attach the cuff to the bottom of the sleeve, stretching slightly. Press and overlock seam allowances.
Stitch the collar stand into a loop, press seam allowances open. Fold the collar stand in half lengthwise, right side out, and press. Insert the collar stand into the neckline, stretching slightly. Press and overlock seam allowances.
Stitch the bottom facing into a loop, press seam allowances open. Fold the bottom facing in half lengthwise, right side out, and press. Attach the facing to the bottom of the garment, stretching slightly. Press and overlock seam allowances.

Tip: for finishing the neckline, bottom edge, and sleeves, you can use ready-made knit bands.