Pattern

Fabric & Materials

Fabric recommendations: knit fabrics of medium stretch from natural or blended fibers. ALSO NEEDED: zipper, invisible zipper, knit bias binding. IF THE PATTERNS HAVE A DOUBLE CONTOUR, THE PATTERNS INCLUDE SEAM ALLOWANCES; IF THE CONTOUR IS SINGLE, THE PATTERNS DO NOT INCLUDE SEAM ALLOWANCES. SEAM ALLOWANCES: Hem allowance for the dress bottom – 2 cm, neckline allowance – 0 cm; sleeve hem – 1.5 cm, other seams – 1 cm. ATTENTION! FIRST, PRINT OUT THE PAPER PATTERNS AND LAY THEM OUT ON THE FABRIC WIDTH (fabric width can be from 90 cm to 150 cm) TO DETERMINE HOW MUCH MATERIAL YOU WILL NEED (do not forget to account for paired and symmetrical pieces). ATTENTION! Markings on the patterns are made on the right side.

CUTTER'S MUST

• From main fabric:
  • Center back part — 2 pieces
  • Side back part - 2 pieces
  • Center front part — 1 piece
  • Side front part — 2 pieces
  • Left front yoke – 1 piece
  • Sleeve — 2 pieces

Sewing Instructions

WHEN STITCHING PIECES, PAY ATTENTION TO THE NOTCHES - THEY MUST MATCH!

1. Serge the center back edges separately. Stitch the center back seam from the zipper mark to the bottom. Serge and press open the allowances. Stitch the back princess seam. Serge the allowance and press towards the center.
2. Stitch and serge the shoulder seams. Serge the upper diagonal edge of the front and the lower edge of the yoke. Press the allowances to the wrong side. Place the zipper under the front and yoke allowances, secure and topstitch from the right side 0.5 mm from the zipper teeth.
3. Bind the neckline with knit bias binding.
4. Stitch the front princess seams. Serge the allowance and press towards the center.
5. Stitch the side seams. Serge the allowances and press towards the back.
6. Serge the sleeve hem, fold the allowance inwards and topstitch. Set the sleeves into the armholes, press and serge the allowances.
7. Cut a bias binding 4 cm wide and a length equal to the length of the lower armhole + 6 cm. Fold the bias binding in half lengthwise, right side out, and press. Place the binding with the armhole edge on the right side, leaving tails, and stitch. Fold the binding to the wrong side, clip the seams, and topstitch along the fold to the main piece. Press the seam.
8. Fold the bottom of the garment twice to the wrong side by 1 cm and topstitch.