Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
A women's drop-waist dress with short set-in sleeves, a curved front yoke, a straight back yoke and princess seams with in-seam pockets on the front. Two gathered tiers form the skirt, and an invisible zipper closes the centre back. Drafted to your own measurements. Recommended fabric: dress fabrics of natural or blended fibres.
A women's drop-waist dress with short set-in sleeves, a curved front yoke, a straight back yoke and princess seams with in-seam pockets on the front. Two gathered tiers form the skirt, and an invisible zipper closes the centre back.
Silhouette: Straight, gently shaped panelled body ending below the hip, with two gathered tiers below.
Length: About knee length.
Neckline: Round, finished by the self-lined yokes (outer and inner yoke stitched together at the neckline); the inner yoke is stitched in the ditch of the outer yoke seam.
Sleeves: Short, one-piece set-in sleeves.
Front: Curved yoke above a centre front panel cut on the fold and two side front panels; the princess seams curve out toward the side seams.
Pockets: In-seam pockets in the front princess seams, with pocket bags stitched to the centre front panel at the marks.
Closure: Invisible zipper in the centre back seam.
Back: Straight yoke cut in two halves, centre back panels in two halves and two side back panels joined by princess seams.
Skirt: Two tiers, each made of a front and back piece cut on the fold and gathered along the upper edge; tier 1 is stitched to the body, tier 2 to tier 1.
Finishing: Seams overlocked; tier seams pressed upward; hems of the dress and sleeves overlocked, turned up and topstitched.
Intermediate. Self-lined yokes, pockets set into princess seams, an invisible zipper, set-in sleeves and gathered tiers.
Dress fabrics of natural or blended fibres.
If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: all allowances – 1.0 cm, hem allowance for the garment bottom and sleeve – 2 cm. Attention! First of all, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need. When stitching pieces, pay attention to the notches - they must match!

#2106
Short Sleeve Fit-and-Flare Maxi Dress

#2107
Button Front Dress With Gathered Skirt

#2098
Tailored Wrap Sheath Dress
#2108
Sleeveless Paneled Mini Dress

#2096
Sleeveless A-Line Dress with Front Insert
#2093
Collared Dress With Ruffled Yoke And Hem

#2113
Sleeveless Bow Dress

#2114
Long Sleeve Collared Button-Front Dress

Minerva Support
Online