Crepe Wrap Coat with Velour Collar

Name: Crepe Wrap Coat with Velour Collar
Brand: Minerva Patterns
SKU: 2020
Price: 5.00 EUR
Availability: InStock

Pattern #2020

A women's knee-length lined wrap coat in crepe with a wide velour collar crossing the front, tucks on the right front, two buttons at the side waist and flared velour cuffs. Drafted to your own measurements. Recommended fabric: crepe for the coat; velour in the same colour for the collar and cuffs; satin in the same colour for the lining, under collars and inner cuffs.

Tech. Description

Crepe Wrap Coat with Velour Collar

A women's knee-length lined wrap coat in crepe with a wide velour collar crossing the front, tucks on the right front, two buttons at the side waist and flared velour cuffs.

When To Wear

In spring and autumn over a dress or skirt for theatre, receptions and other dressy occasions.
Over fitted dresses and pencil skirts that are no longer than the coat.

Key Design Features

Silhouette: Fitted, shaped by centre and side panels on the front and back.

Length: Around the knee, with the overlapping fronts curving into a rounded hem.

Collar: A crepe collar (two front pieces and one back piece) is sewn to the neckline; a two-piece velour collar is set between it and the satin under collar. Two crepe loops are sewn to the edge of the velour collar, and its corner is tacked to the front collar seam.

Front: Asymmetric wrap. The right front is shaped with tucks near the side waist and fastens with two buttons on the left side.

Sleeves: Two-piece (front and back sleeve), each half sewn to the front or back before the shoulder and underarm seams are closed. Velour cuffs with satin inner cuffs.

Back: Centre back seam and curved side panels.

Lining: Full satin lining cut from the coat pieces; the right front lining is cut from the left front piece, without tucks.

Level Of Difficulty

Intermediate. Panel seams, tucks on an asymmetric front, a layered collar with a velour insert and loops, faced cuffs and a full lining.

Fabric Recommendations

Crepe for the coat; velour in the same colour for the collar and cuffs; satin in the same colour for the lining, under collars and inner cuffs.

Additional Supplies

Fusible interfacing (centre and side backs, side fronts, front and back collar, outer cuffs)
2 buttons

Cutter's Must

If the patterns have a double contour, they include seam allowances. If the contour is single, the patterns do not include seam allowances. Seam allowances: All seams - 1 cm. Attention! First, print out the paper patterns and lay them out on the fabric width (fabric width can be from 90 cm to 150 cm) to determine how much material you will need (don't forget to account for paired and symmetrical pieces). According to the designer's intention, the lining is made of satin and exactly repeats the contour of the upper patterns. The lining piece for the central right front is cut according to the left pattern, i.e., without pleats. The inner parts of the front and back collar (undercollars), as well as the inner cuff pieces, are cut from satin.

From crepe:
- Central back - 2 pieces
- Side back - 2 pieces
- Central front left - 1 piece
- Central front right - 1 piece
- Side front - 2 pieces
- Front collar – 2 pieces
- Back collar – 1 piece
- Front sleeve – 2 pieces
- Back sleeve – 2 pieces
From velour:
- Cuff – 2 pieces
- Velour collar – 2 pieces
From fusible interfacing:
- Central and side back parts
- Side front parts
- Front and back collar parts
- Outer cuffs

Sewing Instructions

When stitching pieces, pay attention to the notches - they must match!

Stitch the central and side back parts, as well as the center seam. Press seams open. Attach the back sleeve parts, press seams open. Attach the collar (crepe piece). Press seam.
Stitch the right and left front pieces, forming pleats on the right front piece. Attach the front sleeve parts, press seams open. Attach the collar (crepe piece). Press seam.
Stitch shoulder seams and collar seam. Press seams open. Stitch side seams and sleeve seams. Press seams open. Finish cuffs and attach cuffs to sleeves. Press seam.
From crepe, cut 2 thread loops and sew them to the edge of the velour collar. Stitch the velour collar pieces along the center edge and trim the corners. Stitch the satin collar pieces, press seams open. Finish the collar, inserting the velour collar between the pieces. Turn pieces right side out and press. Secure the corner of the velour collar to the seam where the crepe collar is attached to the front.
Stitch the lining pieces. Finish the coat with the lining. Sew on buttons.