Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#7168

Girls Cap Sleeve High-Low Ruffled Dress

Pattern #7206

A girls' dress with a plain bodice, short raglan-style cap sleeves and a gathered three-layer skirt: a silk underskirt, a chiffon underskirt and a chiffon overskirt with a curved high-low hem. A satin ribbon sash ties at the back. Drafted to your own measurements. Recommended fabric: dense dress silks of natural or blended fibres (silk, viscose, polyester), with chiffon or organza as the companion fabric for the skirt layers.

Tech. Description

Girls Cap Sleeve High-Low Ruffled Dress

A girls' dress with a plain bodice, short raglan-style cap sleeves and a gathered three-layer skirt: a silk underskirt, a chiffon underskirt and a chiffon overskirt with a curved high-low hem. A satin ribbon sash ties at the back.

When To Wear

  • For parties, weddings, school celebrations and other festive occasions.
  • In spring and summer, or indoors in any season.

Key Design Features

Silhouette: Fitted bodice with a full gathered skirt joined at the natural waist.

Length: Around the knee, with a curved high-low hem and the skirt layers falling to different lengths.

Neckline: Round neckline finished with a folded bias binding.

Sleeves: Short cap sleeves cut double, sewn to the front and back along a seam running into the neckline. A line of elastic thread along the lower edge gathers them into a puff. The underarm part of the armhole is bound with bias binding.

Closure: Invisible zipper in the centre back seam; the chiffon layers stay free of the zipper with a topstitched slit.

Skirt: Three layers basted together at the waist and gathered as one; hems of all layers finished with a rolled hem.

Back: Two bodice pieces with a centre back seam; satin ribbon ties stitched in at the side seams and tied in a bow at the back.

Finishing: The front can be decorated with silk or organza flowers.

Level Of Difficulty

Intermediate. Handling chiffon, gathering three skirt layers together, rolled hems, elastic-thread shirring and bias-bound edges.

Fabric Recommendations

Dense dress silks of natural or blended fibres (silk, viscose, polyester), with chiffon or organza as the companion fabric for the skirt layers.

Additional Supplies

  • Invisible zipper
  • Elastic thread
  • Bias binding
  • Satin ribbon for the sash
  • Silk or organza flowers for decoration

Cutter's Must

  • From silk:
    • Back - 2 pieces
    • Front - 1 piece
    • Sleeve – 4 pieces
    • Front skirt half – 1 piece on fold
    • Back skirt half – 2 pieces
  • From chiffon:
    • Front skirt half – 1 piece on fold
    • Back skirt half – 2 pieces
    • Upper front skirt half – 1 piece on fold
    • Upper back skirt half – 2 pieces

Sewing Instructions

  1. Fold sleeve pieces in pairs, right sides together, and stitch along the bottom edge. Press the seam. Open the pieces. Along the seam, stitch with elastic thread, placing the elastic on the lining side.
  2. Attach the sleeves to the back and front. Press the seam towards the sleeve. Stitch the side seams, overlock the seams, and press them towards the back. Finish the armhole with bias binding.
  3. On the skirt pieces, stitch the side seams. Overlock the seams and press them towards the back. Overlock the center back seam separately and stitch from the bottom to the notch. On the chiffon pieces, topstitch the seam allowances along the slit.
  4. Assemble the skirt pieces in the following order: bottom layer — silk, then the chiffon underskirt, and then the chiffon upper skirt. Pin the skirt pieces at the waistline and then treat as a single-layer piece. Along the waistline on the skirt, stitch with loosely tensioned stitches and gather. Attach the skirt to the bodice. Overlock the seam and press upwards.
  5. Insert the zipper into the center seam, not catching the chiffon pieces. Fold the bias binding in half lengthwise, right side out, and press. Place the bias binding on the right side with the neckline edge and stitch. Clip the seam. Fold the bias binding to the wrong side and topstitch along the fold. Turn the ends of the bias binding inwards and secure.
  6. Finish the hem of the skirts with a rolled hem, gently stretching the edge.
  7. Turn under the edges of the satin ribbon twice by 0.7 cm and topstitch. Cut the ribbon into 2 parts and topstitch at the level of the side seam. Decorate the front of the dress with silk or organza flowers.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?