CUTTER'S MUST
- From main fabric:
- 1. Center BACK PANEL – 2 QTY
- 2. Side BACK PANEL – 2 QTY
- 3. Side FRONT PANEL – 2 QTY
- 4. Center FRONT PANEL – 2 QTY
- 5. Back lower part – 1 QTY
- 6. Front lower part – 1 QTY
- 7. COLLAR stand – 2 QTY
- 8. SLEEVE – 2 QTY
- FROM FUSIBLE INTERFACING: lower COLLAR stand.
Sewing Instructions
- Fuse FUSIBLE INTERFACING to the lower COLLAR stand.
- Place COLLAR stand pieces right sides together and stitch the upper edge, starting and ending the seam exactly at the marked attachment line. Clip SEAM ALLOWANCES, trim corners, turn the COLLAR stand right side out.
- Stitch the center back seam, press SEAM ALLOWANCES to the left and serge. Topstitch 0.2 cm along the seam.
- Stitch the back relief seams, press SEAM ALLOWANCES towards the center and serge. Topstitch 0.2 cm along the seams.
- Attach the lower part to the BACK PANEL, press SEAM ALLOWANCES downwards and serge. Topstitch 0.2 cm along the seam.
- Serge the center front seam and stitch up to the NOTCH for the ZIPPER, press the seam open, pressing the ZIPPER opening. Insert the ZIPPER so that the teeth are visible.
- Stitch the front relief seams, press SEAM ALLOWANCES towards the center and serge. Topstitch 0.2 cm along the seams.
- Attach the lower part to the FRONT PANEL, press SEAM ALLOWANCES downwards and serge. Topstitch 0.2 cm along the seam.
- Stitch the side and shoulder seams. Press SEAM ALLOWANCES towards the BACK PANEL and serge.
- Attach the lower COLLAR stand to the neckline, turn under the raw edge of the upper COLLAR stand and topstitch into the attachment seam. Topstitch 0.2 cm along the edge of the COLLAR stand.
- Serge the lower edge of the SLEEVE, press to the wrong side and topstitch. Stitch the SLEEVE seam, press SEAM ALLOWANCES and serge. Attach the SLEEVE to the armhole according to the NOTCHES, press SEAM ALLOWANCES and serge.
- Serge the lower edge of the garment, press to the wrong side and topstitch.
