CUTTER'S MUST
- From main fabric:
- Upper BACK PANEL part - 2 QTY
- Lower BACK PANEL part - 1 QTY
- Upper FRONT PANEL part - 2 QTY
- Lower FRONT PANEL part - 2 QTY
- From contrast fabric:
- BACK PANEL yoke - 1 QTY
- FRONT PANEL yoke - 2 QTY
Sewing Instructions
- From the main fabric, cut BIAS BINDING for FLOUNCES, 4 cm wide. The length of the TRIM STRIP is indicated on the pattern pieces. Overlock one side with a rolled hem. Along the edge of the other side of the TRIM STRIP, stitch with loosely tensioned stitches and gather.
- Stitch the darts on the upper BACK PANEL part. Press the darts towards the center BACK PANEL. Stitch the center seam of the BACK PANEL. Overlock and press the seam.
- Along the lower edge of the upper FRONT PANEL part, between the NOTCHES, stitch with loosely tensioned stitches and gather.
- Stitch the yoke pieces along the side seam. Overlock the seam and press towards the BACK PANEL. Attach the FLOUNCE to the lower edge of the yoke.
- Stitch the shoulder seams of the upper BACK PANEL and FRONT PANEL parts. Overlock the seams and press towards the BACK PANEL. Attach the FLOUNCE to the armhole. Stitch the side seam of the upper BACK PANEL and FRONT PANEL parts. Overlock the seam and press towards the BACK PANEL.
- Stitch the side seams of the lower BACK PANEL and FRONT PANEL parts, leaving a 5 cm unstitched section in the left side seam from the bottom up. Overlock the right seam and press towards the BACK PANEL, overlock and press open the left seam.
- Attach the upper and lower parts of the blouse to the yoke. Overlock the seams and press towards the yoke.
- Sew buttonholes on the left side of the blouse. Attach the FLOUNCE along the contour of the blouse. Start and finish attaching the FLOUNCE from the slit in the side seam. Stitch the side seam completely. Sew hooks under the FLOUNCE on the right FRONT PANEL.
