Shearling Jacket Asymmetrical Fur Collar

CUTTER'S MUST

• From main fabric:
1. FRONT PANEL Side Part – 2 QTY
2. BACK PANEL Side Part – 2 QTY
3. BACK PANEL Center Part – 2 QTY
4. FRONT PANEL Yoke – 2 QTY
5. FRONT PANEL Center Part – 2 QTY
6. SLEEVE Upper Part – 2 QTY
7. SLEEVE Lower Part – 2 QTY
8. CUFF – 2 QTY
• From contrasting fabric:
1. COLLAR – 1 QTY

Sewing Instructions

1. Attach the yoke to the center part of the FRONT PANEL. Press SEAM ALLOWANCES open and topstitch.
2. Attach the side part of the FRONT PANEL to the center part of the FRONT PANEL with an overlapped seam.
3. Stitch the relief seams of the BACK PANEL with an overlapped seam.
4. Stitch the center seam of the BACK PANEL. Press SEAM ALLOWANCES open and topstitch.
5. Stitch the shoulder and side seams of the sheepskin coat. Press SEAM ALLOWANCES open and topstitch.
6. Stitch the front seam of the SLEEVE with an overlapped seam. Fold the SLEEVE and CUFF with fur facing inwards and attach the CUFF to the SLEEVE with a closed seam (trim the CUFF allowance and topstitch the SLEEVE allowance). Stitch the elbow seam of the SLEEVE. Near the CUFF attachment seam, clip the elbow seam allowances and topstitch them onto the CUFF with a closed seam.
7. Set the SLEEVES into the armholes according to the NOTCHES. Clip SEAM ALLOWANCES, press them open from the seam line and topstitch: SLEEVE allowance - onto the SLEEVE, armhole allowance - onto the BACK PANEL and FRONT PANEL.
8. Attach the COLLAR to the garment.
9. Stitch a securing line 0.1 - 0.2 cm from the edge along the front opening, hemline, and CUFF edge. Attach the fastener. Stitch a decorative line 2 cm from the edge along the front opening and hemline.