Halter Keyhole Wrap Tank Top
Introducing a women's sewing pattern for a stylish wrap tank top featuring a contemporary halter keyhole neckline and a graceful side tie closure.
When To Wear
This tank top is designed for versatile warm-weather styling, perfect for:
- Summer & Resort Wear: Ideal for vacations, cruises, or any sunny outdoor event and leisure.
- Casual Chic: Easily dressed up or down for daytime gatherings, luncheons, or relaxed evening drinks.
- Effortless Layering: A foundational piece that pairs beautifully under light jackets, open shirts, or cardigans.
Key Design Features
Silhouette: A fitted, hip-length silhouette designed for comfort and a flattering drape.
Neckline: A contemporary halter neckline with a striking front keyhole detail and a flattering V-neck wrap front.
Closure: A true wrap front secured with an adjustable side tie closure at the waist.
Sleeves: Sleeveless design, featuring slender straps that extend to form the halter neckline.
Back: A clean, unadorned back with elegant halter straps connecting at the center.
Hem: A straight bottom hem, suitable for tucking in or wearing untucked.
Level Of Difficulty
Intermediate. Requires familiarity with knit fabric construction, binding edges, creating a keyhole opening, and assembling a wrap garment.
Fabric Recommendations
Opt for knit fabrics with good drape and stretch to best achieve the garment's fluid silhouette:
- Medium to high stretch knit fabrics
- Knits made from natural fibers (e.g., cotton knits, rayon knits)
- Knits made from blended fibers (e.g., poly-blend knits with spandex)
Additional Supplies
- Knit tape or bias binding for edge finishing
- 1 narrow decorative fastener (e.g., small O-ring)
Cutting Plan
- Back – 1 piece
- Front – 2 pieces
Tip: Pattern pieces made from knit fabrics should be stitched with a special elastic or narrow zigzag stitch. When serging, trim seam allowances to 0.6 – 0.8 cm. The hem allowance is topstitched with a twin needle to maintain elasticity.
Sewing Instructions
- Stitch the bust dart on the front piece. Trim the dart depth, serge, and press.
- Stitch the side seams of the back and front pieces. Serge the seams and press towards the back. Leave an opening for the tie in the right side seam. Topstitch along the opening in the side seam.
- Serge the bottom edge of the garment and the front vertical edge of the front piece. Fold to the wrong side, press, and topstitch.
- Bind the armhole edge and the wrap edge, forming ties 80-90cm long.
- Bind the neckline edge of the back and front pieces, forming a strap. Adjust the strap length during a preliminary fitting. Start and end the binding at the front neckline, leaving 5cm ends. Thread the ends of the binding tape through the fastener and secure them to the front piece on the wrong side.
