Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
Choose knit fabrics with medium to high stretch:
These materials provide comfort, recovery, and the intended fit of the design.
No additional notions are required.
From Main Fabric:
Before cutting your fabric, print and lay out the paper patterns according to your fabric width (90–150 cm) to determine required yardage.
Remember to account for paired and symmetrical pieces.
When sewing, pay close attention to all notches — they must match precisely to ensure correct construction and fit.
For knit fabrics, seams should be sewn using an elastic stitch, narrow zigzag stitch, or overlock stitch.
When finishing on an overlocker, trim seam allowances to approximately 0.6–0.8 cm.
Hems are best finished using a twin needle to preserve fabric stretch and maintain a professional appearance.
Stitch the shoulder and side seams of the Back and Front.
Overlock the seam allowances and press them toward the Back.
Stitch the sleeve seams.
Overlock and press the seam allowances.
Set the sleeves into the armholes, matching the notches.
Overlock the seam allowances and press.
Overlock the lower edge of the garment, the lower edge of the sleeves, and the neckline edge.
Turn the edges to the wrong side, press, and topstitch.

Minerva Support
Online