Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5634
#5636

Tie Neck Halter Top with Gathered Ruffled Hem

Pattern #5635

A women's sleeveless halter top with deep cut-in armholes, an interfaced stand collar whose ends tie in a bow at the front, and round elastic stitched above the hem to gather it into a short ruffle. Drafted to your own measurements. Recommended fabric: fabrics made from natural or blended fibres.

Tech. Description

Tie Neck Halter Top with Gathered Ruffled Hem

A women's sleeveless halter top with deep cut-in armholes, an interfaced stand collar whose ends tie in a bow at the front, and round elastic stitched above the hem to gather it into a short ruffle.

When To Wear

  • In summer, with shorts, skirts or wide-leg trousers.
  • On warm evenings and holidays, tucked or worn loose over a high-waisted skirt.

Key Design Features

Silhouette: Straight, loose body drawn in by elastic near the hem, so the fabric blouses over it.

Length: Hip length, ending in a gathered ruffle below the elastic.

Collar: Stand collar cut from two pieces, one of them interfaced. The collar ends are stitched closed and extend into ties that are knotted at the front, at one side of the neck.

Sleeves: Sleeveless, halter cut. The armholes are cut in towards the neck and bound with bias tape folded in half.

Front: One piece with bust darts, pressed upwards.

Back: One piece with no centre back seam.

Finishing: Side seams overlocked and pressed towards the back; the collar is attached to the top and its inner edge is topstitched into the seam. The hem is turned under and stitched, and 0.3 cm round elastic is topstitched along the marked line to form the ruffle.

Level Of Difficulty

Beginner. Two body pieces, darts, bias-bound armholes, a straight collar band with ties and a stitched-on elastic.

Fabric Recommendations

Fabrics made from natural or blended fibres.

Additional Supplies

  • Fusible interfacing (collar)
  • Bias tape (armholes)
  • Round elastic, 0.3 cm in diameter

Cutting Plan

From main fabric:

  • Back – 1 piece
  • Front – 1 piece
  • Collar – 2 pieces

From fusible interfacing:

  • Collar – 1 piece

Sewing Instructions

  1. Fuse the collar with fusible interfacing.
  2. Stitch the dart on the front. Press the dart upwards.
  3. Stitch the side seams. Overlock and press the side seams towards the back.
  4. Press the bias tape in half lengthwise and bind the armhole edges.
  5. Stitch the collar: from the notch, stitching the collar ends, and then along the upper edge. Turn the collar right side out and press.
  6. Attach the collar with the outer side to the top. Press the seam towards the collar. Press the open edge of the collar and topstitch it into the seam.
  7. Finish the garment hem with a turned-under seam.
  8. Topstitch the elastic along the marked line.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?