Halter Collared Wrap Front Blouse
This sewing pattern crafts a chic halter blouse featuring a sharp collared V-neck, a flattering wrap-front closure, and an elegant tie detail at the waist.
When To Wear:
- Summer Outings & Travel: Perfect for warm weather destinations, offering a light and stylish option for sightseeing or leisurely meals.
- Casual Elegance: Elevates everyday attire with its sophisticated cut and comfortable, sleeveless design.
- Day-to-Evening Versatility: Easily transitions from a daytime look with shorts or skirts to an evening ensemble paired with tailored trousers or a maxi skirt.
Key Design Features
Silhouette: Fitted through the bodice with a wrap-front peplum-style lower front and a gathered lower back panel for subtle volume.
Neckline & Collar: Halter-style V-neckline framed by a sharp, pointed collar that creates a sophisticated open front.
Closure: True wrap-front design secured by an integrated self-tie belt that cinches at the natural waist for a customizable fit.
Sleeves: Sleeveless construction with clean-finished armholes, offering a light and airy feel ideal for warmer climates.
Back: Halter back featuring an upper panel and a lower gathered panel, providing subtle ease and a flattering drape.
Waist: Defined waistline with gathering on the lower front panel, accentuated by the wrap closure and self-tie belt.
Hem: Straight hemline on the lower front panel, designed to hit at or just above the natural waist for a cropped look.
Level Of Difficulty
Intermediate. Involves techniques such as collar construction, gathering, wrap-front assembly, and clean finishing of multiple bodice sections.
Fabric Recommendations
Choose light to medium-weight fabrics with good drape for a comfortable and elegant finish:
- Fabrics made from natural or blended fibers
Additional Supplies
- Fusible interfacing (for the collar)
Cutting Plan
- From main fabric:
- 1. Upper back part – 2 pieces
- 2. Lower back part – 1 piece
- 3. Upper front part – 4 pieces
- 4. Lower front part – 2 pieces
- 5. Collar – 2 pieces
- 6. Belt – 4 pieces
- From fusible interfacing:
- 1. Collar – 1 piece
Sewing Instructions
- Fuse interfacing to the collar.
- Stitch the dart on the upper back part. Press the dart towards the center.
- Stitch the center back seam. Serge the seam allowances and press.
- Serge the back armhole, fold it under, and topstitch at 0.7 cm.
- Stitch the collar. Turn the collar right side out and press.
- Place the upper front parts right sides together and stitch the armhole. Stitch the wrap-around edge from the waist to the notch. Clip the seam allowance at the notch. Leave the section from the notch to the armhole unstitched. Turn the upper front part right side out and press. Trim/grade seam allowances. Then treat the piece as a single layer.
- Attach the undercollar to the upper back and front parts. Press the seam towards the collar. Press the seam allowance of the upper collar inwards and stitch in the ditch.
- Run a basting stitch with loose tension 0.5 cm from the edge along the lower edge of the upper front part. Gather between the notches.
- Stitch the upper and lower front parts together. Serge the seam allowances and press towards the upper part.
- Stitch the upper and lower back parts together. Serge the seam allowances and press towards the upper part.
- Serge the raw edges of the right side seam of the back and front. Stitch the side seams, leaving an opening for the belt in the right side seam. Serge the left seam and press towards the front, press the right seam open. Topstitch along the opening in the side seam.
- Stitch the belts. Turn the pieces right side out and press.
- Serge the bottom edge of the top, fold it under, and topstitch 0.8 cm from the edge.
- Serge the raw edge of the lower front part. Press the edge to the wrong side by 0.8 cm. Insert the belt between the pressed allowance and the main piece. Topstitch the allowance together with the belt. Fold the belt out and stitch a securing seam.
