Cowl Halter Neck Full Skirt Dress
Introducing an elegant women's dress pattern featuring a sophisticated cowl halter neckline, a fitted bodice, and a voluminous full skirt for a graceful silhouette.
When To Wear
This exquisite dress is perfect for occasions demanding refined elegance and a touch of drama, making it an ideal choice for:
- Formal Events & Galas: A show-stopping gown for high-profile gatherings and celebrations.
- Weddings & Receptions: An elegant guest attire option or a stunning bridesmaid dress.
- Special Occasions: Perfect for anniversaries, milestone birthdays, or any event where you want to make a memorable impression.
Key Design Features
Silhouette: A flattering fitted bodice transitioning into a voluminous, full skirt that flows to maxi length.
Neckline: A draped cowl halter neckline that creates a soft, elegant front opening and ties at the back of the neck.
Sleeves: Sleeveless design, highlighting the shoulders and arms.
Back: Features a clean, open back at the top with a central seam for the concealed zipper closure, supporting the halter strap construction.
Waist: A defined, natural waistline accentuates the figure before the skirt flares out.
Closure: A concealed zipper at the center back ensures a smooth and invisible finish.
Length: Floor-length skirt, designed to sweep gracefully.
Level Of Difficulty
Intermediate. This pattern involves skills such as inserting a concealed zipper, working with a lined bodice, and constructing a draped cowl neckline.
Fabric Recommendations
Choose fabrics with a good drape for the cowl and enough body to support the skirt's volume:
- Fabrics made from natural or blended fibers
Additional Supplies
- Concealed zipper
- Fusible interfacing
- Lining fabric
CUTTER'S MUST
- From main fabric:
- BACK PANEL – 2 QTY
- Center FRONT PANEL – 1 QTY
- Inner FRONT PANEL – 2 QTY
- Strap – 1 QTY
- FRONT SKIRT HALF – 1 QTY
- BACK SKIRT HALF – 2 QTY
- From LINING:
- BACK PANEL – 2 QTY
- Center FRONT PANEL – 1 QTY
- Inner FRONT PANEL – 2 QTY
- From FUSIBLE INTERFACING:
- Center FRONT PANEL – 1 QTY
- Inner FRONT PANEL – 2 QTY
- BACK PANEL – 2 QTY
Main fabric can be used as LINING.
Sewing Instructions
- Fuse FUSIBLE INTERFACING to BODICE pieces.
- Stitch the inner FRONT PANEL to the center FRONT PANEL. Overcast the SEAM ALLOWANCES and press towards the inner part.
- Stitch the BACK PANEL to the FRONT PANEL. Overcast the SEAM ALLOWANCES and press towards the BACK PANEL.
- Stitch the LINING pieces in a similar manner. Overcast the bottom edge of the LINING.
- Fold the strap lengthwise, right sides together, and stitch 0.5 cm from the fold. Turn the strap right side out and press. Attach one end of the strap to the neckline of the FRONT PANEL. During fitting, adjust the strap length and attach the second end.
- Stitch the side seams of the skirt. Overcast the SEAM ALLOWANCES and press towards the BACK PANEL. Stitch the center back seam of the BACK SKIRT HALF from the NOTCHES for the ZIPPER downwards. Overcast the SEAM ALLOWANCES and press open, pressing the ZIPPER openings.
- Stitch the BODICE to the skirt. Overcast the SEAM ALLOWANCES and press towards the FRONT PANEL. Insert the ZIPPER. Press the seam.
- Place the BODICE and LINING right sides together. Fold back the LINING 5 mm from the edges of the concealed fastener and pin to the upper edge of the dress. Fold the SEAM ALLOWANCES along the ZIPPER to the right side of the dress and pin to the upper edge over the LINING. Stitch the upper edges. Fold the SEAM ALLOWANCES along the fastener to the wrong side. Fold the LINING up and topstitch onto the seam allowance 1-2 mm from the seam. Fold the LINING to the wrong side and attach it to the ZIPPER tape. Press the pieces.
- Topstitch the bottom edge of the LINING into the seam joining the BODICE and skirt.
- Overcast the bottom edge of the sundress, fold under, and topstitch 0.5 cm from the bottom edge.
