CUTTER'S MUST
- From main fabric:
- 1. Upper FRONT PANEL – 1 QTY
- 2. Lower FRONT PANEL – 1 QTY
- 3. Lower BACK PANEL – 2 QTY
- 4. Left upper BACK PANEL – 1 QTY
- 5. Right upper BACK PANEL – 1 QTY
- 6. SLEEVE – 2 QTY
Sewing Instructions
- Mark and stitch bust darts on the upper and lower FRONT PANEL. Press bust darts downwards. Mark and stitch waist darts on the upper and lower BACK PANEL. Press waist darts towards the center back. Mark and stitch shoulder darts on the upper BACK PANEL. Press darts towards the center back.
- Overlock the side and shoulder SEAM ALLOWANCES of the outer and inner dress layers. Stitch the shoulder seams of the outer and inner dress layers. Stitch the side seams of the outer and inner dress layers, leaving a slit in the left side seam of the inner dress. Press open the side and shoulder seams of the dress, pressing the slit in the side seam. Topstitch along the slit at a distance of 0.5 cm from the edge.
- Overlock the bottom edge of the outer FRONT PANEL and BACK PANEL. Fold, press, and topstitch the bottom edge of the outer FRONT PANEL and BACK PANEL.
- Place the outer dress layer right side to the wrong side of the inner dress layer and stitch the neckline edge of the FRONT PANEL and BACK PANEL. Topstitch the neckline FACING allowance to the inner dress layer at a distance of 0.2 cm from the stitching line.
- Overlock the center back edge of the outer and inner dress layers (two dress layers together). Stitch the center back seam of the dress up to the NOTCHES for the ZIPPER. Press open the center back seam, press the ZIPPER opening. Insert the ZIPPER into the center back seam.
- Overlock and press the SLEEVE hem. Stitch and overlock the SLEEVE edge, folding back the hem allowance. Topstitch the SLEEVE hem.
- Set the SLEEVE into the armhole (two dress layers together). Overlock the setting seam and press towards the armhole.
- Overlock, fold, and topstitch the hem of the inner dress layer.
