Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5495
#5497

Gathered Tie Neck Bell Sleeve Asymmetrical Tunic

Pattern #5496

A loose women's tunic with a gathered neckline bound in bias tape that extends into ties, a keyhole slit at the centre front, long wide flared sleeves and an asymmetric hem cut to an off-centre point at the front and back, with side slits. Drafted to your own measurements. Recommended fabric: light, soft woven fabrics that gather well: viscose, crepe de Chine, georgette, cotton voile or batiste.

Tech. Description

Gathered Tie Neck Bell Sleeve Asymmetrical Tunic

A loose women's tunic with a gathered neckline bound in bias tape that extends into ties, a keyhole slit at the centre front, long wide flared sleeves and an asymmetric hem cut to an off-centre point at the front and back, with side slits.

When To Wear

  • In warm weather, worn loose over trousers, leggings or jeans.
  • For everyday and holiday wear in light, soft fabrics.

Key Design Features

Silhouette: Loose and straight, cut from three pieces: one front, one back and two sleeves; bust darts on the front.

Length: Tunic length, longest at the off-centre points of the front and back hem.

Neckline: Front and back neckline gathered on a loose stitch line to the amount wanted at fitting; a keyhole slit at the centre front; the neckline and slit are bound with folded bias tape, left long at the front to tie.

Sleeves: Long sleeves that widen towards the hem, with the seam lines running from the neckline to the underarm as shown in the drawing.

Finishing: Side seams open into slits above the hem, topstitched 0.5 cm from the edge; hem and sleeve hems finished with a rolled overlock edge.

Level Of Difficulty

Beginner. Few pieces, bust darts, gathering and bias binding of the neckline, and a rolled overlock hem.

Fabric Recommendations

Light, soft woven fabrics that gather well: viscose, crepe de Chine, georgette, cotton voile or batiste.

Additional Supplies

  • Bias tape for the neckline binding and ties

Cutter's Must

From main fabric:

  • Sleeve – 2 pieces
  • Front – 1 piece
  • Back – 1 piece

Sewing Instructions

  1. Mark and stitch the bust darts on the Front. Press the bust darts downwards.
  2. Overlock the side edges of the Front and Back. Stitch the side seams down to the slit notches. Press the side seams open, pressing back the slit allowances. Topstitch along the slits 0.5 cm from the edge.
  3. Stitch the Sleeve seam and overlock it. Press the sleeve seam towards the back.
  4. Sew the sleeves into the armholes.
  5. Stitch along the neckline edge of the Front and Back 0.5 cm from the edge with a loose stitch. Try on the tunic and pull up the stitching to gather the neckline to the amount you want, spreading the gathers evenly along the whole length.
  6. Fold the bias tape in half lengthwise and press. Bind the keyhole slit of the Front and the front and back neckline with the bias tape, leaving the tape long at the front for the ties.
  7. Finish the tunic hem and the sleeve hems with a rolled overlock edge.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?