Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5462
#5464

Sleeveless Flounced Princess Seam Dress

Pattern #5463

A women's close-fitting sleeveless dress with princess seams from the armholes on the front and back, a V-neck at the front and a scooped back neck. A flounce, cut in separate sections for each panel, is joined at the low hip along a curved seam and falls to an uneven hemline. Drafted to your own measurements. Recommended fabric: lightweight fabrics made of natural fibres.

Tech. Description

Sleeveless Flounced Princess Seam Dress

A women's close-fitting sleeveless dress with princess seams from the armholes on the front and back, a V-neck at the front and a scooped back neck. A flounce, cut in separate sections for each panel, is joined at the low hip along a curved seam and falls to an uneven hemline.

When To Wear

  • Summer parties, dinners and dances, with sandals or heeled shoes.
  • Warm evenings on holiday; a light wrap or cardigan over it when it cools down.

Key Design Features

Silhouette: Fitted bodice and hips without a waist seam, shaped by princess seams; the flounce adds width below the low hip.

Length: Uneven: on the front the flounce is shorter at the centre and longer at the sides; on the back it falls to a point at the centre.

Neckline: V-neck at the front, scooped at the back, both bound with bias tape.

Sleeves: Sleeveless, armholes bound with bias tape.

Front: Centre front panel cut in one piece, with side front panels joined by princess seams pressed towards the centre.

Back: Centre back seam with an invisible zip; princess seams from the armholes.

Skirt: Four flounce sections on the front (centre front, two side fronts) and back (two middle backs, two side backs), each stitched to its own panel. The joining seam dips to a point at the centre front and curves in a wave across the back.

Finishing: Seams overlocked; flounce hem overlocked, turned to the wrong side and topstitched 0.5 cm from the edge.

Level Of Difficulty

Intermediate. Matching flounce sections to curved panel edges, princess seams, an invisible zip and bias-bound edges in lightweight fabric.

Fabric Recommendations

Lightweight fabrics made of natural fibres.

Additional Supplies

  • Invisible zipper
  • Bias tape (neckline and armholes)

Cutter's Must

  • From main fabric:
  • Center Front – 1 piece
  • Center Front Flounce – 1 piece
  • Side Front – 2 pieces
  • Side Front Flounce – 2 pieces
  • Side Back – 2 pieces
  • Side Back Flounce – 2 pieces
  • Middle Back – 2 pieces
  • Middle Back Flounce – 2 pieces

Sewing Instructions

  1. Stitch the Center Front Flounce to the Center Front. Overlock the seam and press it towards the Center Front. Stitch the Side Front Flounce to the Side Front. Overlock the seam and press it towards the Side Front.
  2. Stitch the Middle Back Flounce to the Middle Back. Overlock the seam and press it towards the Middle Back. Stitch the Side Back Flounce to the Side Back. Overlock the seam and press it towards the Side Back.
  3. Stitch the princess seams joining the Center Front and Side Fronts. Overlock the seams and press them towards the Center Front.
  4. Stitch the princess seams joining the Middle Back and Side Backs. Overlock the seams and press them towards the Middle Back.
  5. Stitch the side seams of the dress. Overlock the seams and press them towards the back. Fold the bias binding in half lengthwise, press, and use it to bind the neckline of the front and back and the armholes of the front and back.
  6. Overlock the centre back edges. Stitch the centre back seam up to the zipper notch. Press the seam open, pressing back the zipper opening allowances. Insert the invisible zipper.
  7. Stitch and overlock the shoulder seams of the dress. Press the shoulder seams towards the back. Overlock the lower edge of the flounces. Turn the lower edge of the flounces to the wrong side, press, and topstitch 0.5 cm from the lower edge.

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?