Side Buckle Wrap Blouse

CUTTER'S MUST

• From main fabric:
• BACK PANEL – 1 QTY
• Left FRONT PANEL – 1 QTY
• Right FRONT PANEL – 1 QTY
• Long belt – 1 QTY
• Short belt – 1 QTY

Sewing Instructions

1. Mark and stitch darts on the FRONT PANEL and BACK PANEL. Press darts on the FRONT PANEL and BACK PANEL.
2. Stitch and overlock shoulder seams. Press shoulder seams towards the BACK PANEL.
3. Overlock: the neckline edge of the FRONT PANEL and BACK PANEL, the bottom edge of the SLEEVE. Fold the overlocked SEAM ALLOWANCES of the FRONT PANEL and BACK PANEL neckline and topstitch 0.5 cm from the edge. Fold the overlocked SEAM ALLOWANCES of the bottom of the integrated SLEEVE and topstitch 0.5 cm from the edge.
4. Overlock the side seams of the top. Stitch the side seams, leaving an opening in the left side seam, press the side seams open. Overlock the bottom edge of the top, fold and topstitch.
5. Fold the belt in half and stitch along two sides. Turn the belt right side out and press. Topstitch 0.1 cm from the edge of the belt. Attach the belt to the left FRONT PANEL. Overlock and topstitch the attachment seam.
6. Overlock the side edge of the short belt. Fold the belt with the right FRONT PANEL and stitch along three sides. Turn the belt right side out and press. Topstitch 0.1 cm from the edge of the belt. Tip: if desired, you can finish the end of the belt with a buckle.