Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA
This Minerva sewing pattern for a women's leather utility jacket features a structured silhouette, front zipper closure, and multiple pockets, including two lined patch pockets with flaps and an additional zippered chest pocket. With its clean design lines and wide band cuffs, this fully lined jacket is designed as a practical yet refined outerwear piece. It's suitable for everyday wear, utility-inspired styling, and transitional dressing, offering both durability and comfort.
Introducing a women’s sewing pattern for a structured jacket featuring a front zipper closure, patch pockets with flaps, a zippered chest pocket and a full lining, with a clean, functional silhouette.
This jacket is designed as a practical yet refined outerwear piece, suitable for:
Casual Outerwear
A structured jacket ideal for everyday wear, combining durability with clean design lines.
Utility-Inspired Styling
Suitable for modern wardrobes incorporating functional elements such as patch pockets and zipper closures.
Transitional Dressing
Perfect as a lightweight jacket for seasonal layering, offering both structure and comfort.
Silhouette
Straight, structured silhouette with minimal shaping, designed for a clean and balanced fit.
Collar
Classic shirt-style collar constructed from upper and under collar pieces, providing a sharp neckline finish.
Closure
Center front zipper closure, delivering a modern and functional front opening.
Sleeves
Long set-in sleeves finished with wide band cuffs, maintaining a structured and tailored appearance.
Pockets
Two lined patch pockets with rounded corners and rounded flaps positioned on the lower front, combining functionality with a strong visual element.
Additional vertical zipper pocket on the left chest for added utility detail.
Hem Band
Structured band at the lower edge composed of front and back sections, anchoring the silhouette and providing a defined lower edge.
Back
Clean back with a center seam, maintaining structure and supporting fit.
Advanced. This pattern requires confident sewing skills, including zipper insertion, pocket and flap construction, collar assembly, and precise handling of structured materials.
Choose materials that support structure and durability:
These materials enhance the clean lines and functional character of the jacket.
For drafting lining patterns, use the following main patterns
Then cut the following piece using its pattern:
For drafting fusible interfacing patterns, use main patterns:
Before cutting your fabric:
Apply fusible interfacing to the Center Front Facing, Lower Collar, Cuff, Back Belt and Front Belt.
Place the Upper Collar and Lower Collar right sides together and stitch along the outer contour.
Mark the zipper pocket placement on the Left Front.
Place the pocket opening facing on the Front, right sides together, and pin along the marked pocket opening line.
From the wrong side, stitch along the marked lines of the pocket, forming a rectangle.
Cut the facing and the Front along the pocket opening, clipping diagonally into the corners 1–1.5 cm from each end.
Turn the facing to the wrong side through the opening, straighten the edges and press the pocket opening.
Position the zipper under the edges of the opening so that the teeth are visible and edgestitch around the opening 0.2 cm from the edge.
Attach the Smaller Pocket Bag of Upper Pocket and Bigger Pocket Bag of Upper Pocket, then stitch the pocket bag closed.
Place the Front Pocket Flap pieces in pairs (flap and under flap), right sides together, and stitch along the outer contour.
Trim seam allowances at the curved corners and turn right side out.
Topstitch along the outer contour at 0.5 cm from the edge.
Stitch the pocket lining to the cut-on facing of the Pocket, then stitch the lining and pocket edges together along the contour, leaving an opening of approximately 5 cm in the side edge for turning.
Trim seam allowances at the curved corners and turn right side out.
Shape and press the pocket.
Place the Front Pocket Flap onto the Front according to the markings and topstitch.
Fold the flap downward and topstitch at 0.5 cm from the seam.
Place the Pocket onto the Front according to the markings and topstitch along the outer contour at 0.5 cm from the edge.
Reinforce the upper corners of the pockets with double stitching.
Stitch the center back seam of the Back.
Attach the Front Belt to the lower edge of the Front.
Place the Front Belt pieces right sides together and stitch along the lower edge.
Attach the Back Belt to the lower edge of the Back.
Place the Back Belt pieces right sides together and stitch along the lower edge.
Stitch the zipper to the front edges.
Turn under the front edges along the zipper and press.
Stitch the shoulder and side seams of the jacket.
Stitch the lower edge of the Center Front Facing to the upper edge of the Front Belt.
Place the Center Front Facing onto the Front, right sides together, and stitch along the front edge.
Stitch from the Front side upward to the notch marking the end of the collar attachment.
Trim seam allowances at the upper and lower corners.
Turn the front edges right side out and shape the seams.
Topstitch along the front edge at 0.5 cm from the edge.
Attach the Lower Collar to the neckline.
Attach the Upper Collar to the Center Front Facing.
Attach the Cuff to the lower edge of the Sleeve.
Stitch the sleeve seam together with the cuff.
Set the sleeves into the armholes, matching notches.
Insert shoulder pads.
On the lining pieces, stitch the seams and set in the sleeves, leaving an opening in the sleeve seam.
Attach the lining to the inner edges of the Center Front Facing and the Upper Collar.
Press the seam allowances of the collar attachment open and secure them close to the seams.
Attach the lining to the lower edge of the hem band (Front Belt and Back Belt) and to the lower edge of the sleeves.
Turn the jacket right side out through the opening in the sleeve.
Stitch in the ditch of the hem band and Cuff seams to secure them.
Close the opening in the sleeve seam.
Minerva Support
Online