Professional made-to-measure digital sewing patterns — PDF · PLT · DXF AAMA

Minervainervabeta
#5252
#5254

Ruffle Hem Pantaloons with Elastic Waistband

Pattern #5253

Women's short pantaloons with wide straight legs, a pull-on elastic waist in a cut-on casing and a gathered flounce at each leg hem, edged with narrow lace. Drafted to your own measurements. Recommended fabric: lightweight silk or cotton fabrics, for example cotton batiste with broderie anglaise embroidery.

Tech. Description

Ruffle Hem Pantaloons with Elastic Waist

Women's short pantaloons with wide straight legs, a pull-on elastic waist in a cut-on casing and a gathered flounce at each leg hem, edged with narrow lace.

When To Wear

  • As sleepwear or loungewear in warm weather, sewn from batiste or broderie anglaise.
  • Under a dress or skirt as a light layer.

Key Design Features

Silhouette: Loose through the hip, the legs widening slightly toward the hem.

Length: Short legs, ending above the knee.

Waist: Cut-on facing folded to the inside to form a casing, with elastic equal to the waist measurement threaded through an opening left in the centre back seam. The waist is gathered by the elastic.

Legs: Front and back halves joined by inseams and side seams, then by the centre front and back seam.

Finishing: Each flounce is sewn into a ring, gathered to the leg hem and attached; its lower edge is overlocked, turned under and topstitched, with a 1 cm lace strip stitched underneath so it shows below the edge.

Level Of Difficulty

Beginner. Straight seams, an elastic casing, a gathered flounce and lace trim; no closures.

Fabric Recommendations

Lightweight silk or cotton fabrics, for example cotton batiste with broderie anglaise embroidery.

Additional Supplies

  • Elastic for the waist, 2 cm wide
  • Lace strip, 1 cm wide

Cutter's Must

  • Front Half – 2 pieces
  • Back Half – 2 pieces
  • Flounce – 2 pieces

Sewing Instructions

  1. Place each Front Half on a Back Half, right sides together, and stitch the inseam and side seam. Press the seam allowances open.
  2. Turn one leg right side out and place it inside the other leg, right sides together. Stitch the crotch seam (centre front and centre back), leaving a section of the centre back seam unstitched above the fold line of the cut-on facing for threading the elastic.
  3. Press the cut-on facing to the wrong side along the fold line, turn under the raw edge, and topstitch 0.1 cm from the fold. Stitch along the marked line to form the casing and thread elastic equal to the waist measurement through it.
  4. Stitch each Flounce into a ring, gather it to the length of the leg hem and stitch it to the lower edge of the leg. Overlock the lower edge of the Flounce, press it to the wrong side, and topstitch. Place the lace strip under the lower edge of the Flounce and stitch.

Features

Order Pattern

Standard Sizes

Individual Measurements

Please double-check the file format and paper size. Your pattern is drafted in exactly the format you select; a different format or paper size later is a new order.

Similar patterns

View all
Support

Minerva Support

Online
Support
Hi! I'm Minerva's AI assistant. What can I help you with?