Panelled Cup Wide Strap Bra

CUTTER'S MUST

• From main fabric:
• 1. Strap - QTY 4
• 2. Side Panel – QTY 2 on fold
• 3. Cup Side Panel – QTY 4
• 4. Cup Front Panel – QTY 2 on fold
• 5. Front Insert - QTY 2 on fold

Sewing Instructions

1. Fold straps in pairs, right sides together, and stitch along the long sides and one short side. Turn straps right side out, press, and topstitch along the edge.
2. Stitch the side and front cup panels together. Fold the cup front panel to the wrong side and stitch along the upper, front, and lower edges, inserting the strap between the panels. Turn cups right side out, baste, and press.
3. Fold the side panels in half lengthwise and stitch along the long side, turn right side out, and press. Attach the side panels to the cups.
4. Fold the inserts right sides together and stitch the upper and lower sides. Turn the insert right side out and press. Attach the insert to the cups. Topstitch the cups along the lower side with a 0.5 cm seam.
5. Insert elastic TRIM STRIP through the open edges of the side panels up to the marking, secure, and gather the fabric onto it. Attach the fastener details to the ends of the side panels.
6. Try on the bra, adjust the length of the straps, and sew them to the side panel.