Lace Yoke Sleeveless Bodysuit with Inserts

CUTTER'S MUST

• From main fabric:
• BACK PANEL - 2 QTY
• FRONT PANEL - 1 QTY on fold
• From lace:
• BACK YOKE - 2 QTY
• FRONT YOKE - 1 QTY on fold
• BOTTOM FACING – 2 QTY

Sewing Instructions

1. Stitch the center seam of the BACK PANEL and back yoke, leaving an opening for the fastener.
2. Stitch the shoulder seams on the yokes.
3. Trim the SEAM ALLOWANCE along the upper edges of the FRONT PANEL and BACK PANEL and bind them with ready-made BIAS BINDING. Place the bound edges of the FRONT PANEL and BACK PANEL onto the lower SEAM ALLOWANCES of the yokes and topstitch them into the binding attachment seams.
4. Trim the SEAM ALLOWANCES along the neckline and armholes and bind them with ready-made BIAS BINDING.
5. Stitch the side seams. Trim the SEAM ALLOWANCES along the leg openings and the outer parts of the bottom facings and bind them. Topstitch the bound edges of the leg openings onto the FACING SEAM ALLOWANCES.
6. Press the bottom SEAM ALLOWANCES of the FRONT PANEL and BACK PANEL to the wrong side, place hook-and-eye tape under the edges and topstitch.
7. On the left side of the opening, create a thread loop; sew a button to the right side.