CUTTER'S MUST
- FRONT PANEL - 2 QTY
- BACK PANEL - 1 QTY with fold
- SLEEVE - 2 QTY
- SKIRT HALF - 2 QTY with fold
- BIAS BINDING - 1 QTY
Sewing Instructions
- Stitch darts on the FRONT PANEL, press allowances downwards.
- Stitch side seams on the skirt and shirt top. Stitch shoulder seams and SLEEVE seams. Press SEAM ALLOWANCES open and overcast.
- On each FRONT PANEL, press the integrated FACING to the wrong side along the edge line, fold the raw edge inwards, press and baste.
- Fold the BIAS BINDING in half lengthwise, right side out, and press. Align the BIAS BINDING with the neckline edge and stitch at 0.5 cm. Press the BIAS BINDING upwards, fold the ends. Fold the BIAS BINDING fold to the wrong side, enclosing the neckline edge, and topstitch from the right side into the BIAS BINDING attachment seam.
- Set in the SLEEVES. Overcast SEAM ALLOWANCES and press towards the SLEEVE.
- Overlap the right FRONT PANEL over the left, aligning the center lines and baste the bottom edges. Place the skirt and top right sides together, gather the skirt edge to match the length of the top edge and stitch. Overcast SEAM ALLOWANCES and press upwards.
- Overcast SEAM ALLOWANCES for the hem of the garment and SLEEVE hem, fold to the wrong side, place LACE TRIM underneath so that the scallops peek out, and topstitch.
- On the right FRONT PANEL, overcast buttonholes, on the left, sew on buttons.
