Faced Waist Bootcut Pants

CUTTER'S MUST

• FRONT PANEL - 2 QTY
• BACK PANEL - 2 QTY
• FRONT FACING - 1 QTY on fold
• BACK FACING - 2 QTY

Sewing Instructions

1. Stitch darts, press dart fullness towards the center.
2. Stitch side seams, leaving the top of the left seam open for the ZIPPER slit. Stitch inseams. Press SEAM ALLOWANCES open. Stitch front and back center seams in one go. Press SEAM ALLOWANCES open from the top down to the start of the curves.
3. ZIPPER CLOSURE: Press SEAM ALLOWANCES along the slit edges to the wrong side. Stitch the ZIPPER to both sides under the edges of the slit.
4. Upper edge of trousers: On the FACINGS, stitch the back center seam and the right side seam. Stitch the FACING right sides together to the upper edges of the panels. Trim SEAM ALLOWANCES to 0.5 cm width, lay them under the FACINGS and stitch close to the edge. Turn FACINGS to the wrong side, press the upper edge. Fold under the FACINGS from the inside, stitch to the ZIPPER tape. Additionally, stitch the lower edges of the FACINGS to the SEAM ALLOWANCES and dart fullness.
5. Lower edge: Turn up the hem SEAM ALLOWANCES to the wrong side and stitch.